|
|
MIB module validation
Validation report
Severity level requested: 3
Line | Severity |
Problem |
0 |   | [1] http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB: Operation now in progress |
  | [1] (null): Operation now in progress |
  | smilint: cannot locate module `http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB' |
[1] http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB: Operation now in progress
[1] (null): Operation now in progress
smilint: cannot locate module `http://www.simpleweb.org/ietf/mibs/modules/test/COFFEE-POT-MIB'
COFFEE-POT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, transmission
FROM SNMPv2-SMI
TimeInterval, DisplayString
FROM SNMPv2-TC;
coffee MODULE-IDENTITY
LAST-UPDATED "9803231700Z"
ORGANIZATION "Networked Appliance Management Working Group"
CONTACT-INFO
" Michael Slavitch
Loran Technologies,
955 Green Valley Crescent
Ottawa, Ontario Canada K2A 0B6
Tel: 613-723-7505
Fax: 613-723-7209
E-mail: [email protected]"
DESCRIPTION
"The MIB Module for coffee vending devices."
::= { transmission 132 }
potName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor description of the pot under management"
::= { coffee 1 }
potCapacity OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of units of beverage supported by this device
(regardless of its current state) ."
::= { coffee 2 }
potType OBJECT-TYPE
SYNTAX INTEGER {
automatic-drip(1),
percolator(2),
french-press(3),
espresso(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The brew type of the coffee pot."
::= { coffee 3 }
potLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical location of the pot in question"
::= { coffee 4 }
potMonitor OBJECT IDENTIFIER ::= { coffee 6 }
potOperStatus OBJECT-TYPE
SYNTAX INTEGER {
off(1),
brewing(2),
holding(3),
other(4),
waiting(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating status of the pot in question. Note
that this is a read-only feature. Current hardware
prevents us from changing the port state via SNMP."
::= { potMonitor 1 }
potLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of units of coffee under management. The
units of level are defined in potMetric below."
::= { potMonitor 2 }
potMetric OBJECT-TYPE
SYNTAX INTEGER {
espresso(1),
demi-tasse(2),
cup(3),
mug(4),
bucket(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor description of the pot under management"
::= { potMonitor 3 }
potStartTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds since Jan 1 1970 to start the pot
if and only if potOperStatus is waiting(5)"
::= { potMonitor 4 }
lastStartTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time, in TimeTicks, since the coffee
making process was initiated."
::= { potMonitor 5 }
potTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ambient temperature of the coffee within the pot"
::= { potMonitor 6 }
END
|
|