AGGREGATE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, experimental, Unsigned32, OBJECT-TYPE, Opaque FROM SNMPv2-SMI OwnerString FROM RMON-MIB RowStatus, StorageType, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; aggrMIB MODULE-IDENTITY LAST-UPDATED "200604270000Z" -- 27th April, 2006 ORGANIZATION "Cyber Solutions Inc. NetMan Working Group" CONTACT-INFO " Glenn Mansfield Keeni Postal: Cyber Solutions Inc. 6-6-3, Minami Yoshinari Aoba-ku, Sendai, Japan 989-3204. Tel: +81-22-303-4012 Fax: +81-22-303-4015 E-mail: [email protected] Support Group E-mail: [email protected]" DESCRIPTION "The MIB for servicing aggregate objects. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4498; see the RFC itself for full legal notices. " REVISION "200604270000Z" -- 27th April, 2006 DESCRIPTION "Initial version, published as RFC 4498." ::= { experimental 123 } AggrMOErrorStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used to model the error status of the constituent MO instances. The error status for a constituent MO instance is given in terms of two elements: o The moIndex, which indicates the position of the MO instance (starting at 1) in the value of the aggregated MO instance. o The moError, which indicates the error that was encountered in fetching that MO instance. The syntax in ASN.1 Notation will be ErrorStatus :: = SEQUENCE { moIndex Integer32, moError SnmpPduErrorStatus } AggrMOErrorStatus ::= SEQUENCE OF { ErrorStatus } Note1: The command responder will supply values for all constituent MO instances, in the same order in which the MO instances are specified for the AgMO. If an error is encountered for an MO instance, then the corresponding value will have an ASN.1 value NULL, and an error will be flagged in the corresponding AggrMOErrorStatus object. Only MOs for which errors have been encountered will have their corresponding moIndex and moError values set. Note2: The error code for the component MO instances will be in accordance with the SnmpPduErrorStatus TC defined in the DISMAN-SCHEDULE-MIB [RFC3231]. Note3: The command generator will need to know constituent MO instances and their order to correctly interpret AggrMOErrorStatus. " SYNTAX Opaque (SIZE (0..1024)) AggrMOValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used to model the aggregate MOs. It will have a format dependent on the constituent MOs, a sequence of values. The syntax in ASN.1 Notation will be MOValue :: = SEQUENCE { value ObjectSyntax } where 'value' is the value of a constituent MO instance. AggrMOValue :: = SEQUENCE OF { MOValue } Note: The command generator will need to know the constituent MO instances and their order to correctly interpret AggrMOValue." SYNTAX Opaque (SIZE (0..1024)) AggrMOCompressedValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type is used to model the compressed aggregate MOs." SYNTAX OCTET STRING (SIZE (0..1024)) -- -- The aggregation control table -- There will be a row for each aggregate MO -- aggrCtlTable OBJECT-TYPE SYNTAX SEQUENCE OF AggrCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that controls the aggregation of the MOs." ::= {aggrMIB 1} aggrCtlEntry OBJECT-TYPE SYNTAX AggrCtlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of the control table that defines one aggregated MO. Entries in this table are required to survive a reboot of the managed entity depending on the value of the corresponding aggrCtlEntryStorageType instance. " INDEX {aggrCtlEntryID } ::= {aggrCtlTable 1 } AggrCtlEntry ::= SEQUENCE { aggrCtlEntryID SnmpAdminString, aggrCtlMOIndex Unsigned32, aggrCtlMODescr SnmpAdminString, aggrCtlCompressionAlgorithm INTEGER, aggrCtlEntryOwner OwnerString, aggrCtlEntryStorageType StorageType, aggrCtlEntryStatus RowStatus } aggrCtlEntryID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A locally unique, administratively assigned name for this aggregated MO. It is used as an index to uniquely identify this row in the table." ::= { aggrCtlEntry 1 } aggrCtlMOIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "A pointer to a group of MOs identified by aggrMOEntryID in the aggrMOTable. This is the group of MOs that will be aggregated." ::= { aggrCtlEntry 2 } aggrCtlMODescr OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description of the object that is being aggregated." ::= {aggrCtlEntry 3} -- only one compression algorithm is defined as of now. aggrCtlCompressionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none (1), deflate (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The compression algorithm that will be used by the agent to compress the value of the aggregated object. The deflate algorithm and corresponding data format specification is described in RFC 1951. It is compatible with the widely used gzip utility. " REFERENCE "RFC1951 : DEFLATE Compressed Data Format Specification version 1.3 " DEFVAL { none } ::= {aggrCtlEntry 4} aggrCtlEntryOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-create STATUS current DESCRIPTION "The entity that created this entry." ::= {aggrCtlEntry 5} aggrCtlEntryStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or backed up by non-volatile (permanent) storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. " ::= {aggrCtlEntry 6} aggrCtlEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions. Objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. Thus, to modify one or more of the objects in this conceptual row, a. change the row status to 'notInService', b. change the values of the row, and c. change the row status to 'active'. The aggrCtlEntryStatus may be changed to 'active' if all the MOs in the conceptual row have been assigned valid values. " ::= {aggrCtlEntry 7} -- -- The Table of primary(simple) MOs -- aggrMOTable OBJECT-TYPE SYNTAX SEQUENCE OF AggrMOEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of primary(simple) MOs that will be aggregated. Each row in this table represents a MO that will be aggregated. The aggrMOEntryID index is used to identify the group of MOs that will be aggregated. The aggrMOIndex instance in the corresponding row of the aggrCtlTable will have a value equal to the value of aggrMOEntryID. The aggrMOEntryMOID index is used to identify an MO in the group. " ::= {aggrMIB 2} aggrMOEntry OBJECT-TYPE SYNTAX AggrMOEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row of the table that specifies one MO. Entries in this table are required to survive a reboot of the managed entity depending on the value of the corresponding aggrMOEntryStorageType instance. " INDEX { aggrMOEntryID, aggrMOEntryMOID } ::= {aggrMOTable 1 } AggrMOEntry ::= SEQUENCE { aggrMOEntryID Unsigned32, aggrMOEntryMOID Unsigned32, aggrMOInstance OBJECT IDENTIFIER, aggrMODescr SnmpAdminString, aggrMOEntryStorageType StorageType, aggrMOEntryStatus RowStatus } aggrMOEntryID OBJECT-TYPE SYNTAX Unsigned32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely identifying a group of MOs that will be aggregated." ::= { aggrMOEntry 1 } aggrMOEntryMOID OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index to uniquely identify an MO instance in the group of MO instances that will be aggregated." ::= { aggrMOEntry 2 } aggrMOInstance OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The OID of the MO instance, the value of which will be sampled by the agent." ::= { aggrMOEntry 3 } aggrMODescr OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "A textual description of the object that will be aggregated." ::= {aggrMOEntry 4} aggrMOEntryStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the parameters defined in this row are kept in volatile storage and lost upon reboot or backed up by non-volatile (permanent) storage. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. " ::= {aggrMOEntry 5} aggrMOEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions. Objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. Thus, to modify one or more of the objects in this conceptual row, a. change the row status to 'notInService', b. change the values of the row, and c. change the row status to 'active'. The aggrMOEntryStatus may be changed to 'active' iff all the MOs in the conceptual row have been assigned valid values. " ::= {aggrMOEntry 6} -- -- aggrDataTable: The Table of Data. Each row represents a Data -- set. aggrCtlEntryID is the key to the table. -- It is used to identify instances of the -- aggregated MO that are present in the table. -- aggrDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AggrDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row of this table contains information about an aggregateMO indexed by aggrCtlEntryID." ::= {aggrMIB 3} aggrDataEntry OBJECT-TYPE SYNTAX AggrDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information pertaining to an aggregate MO." INDEX {aggrCtlEntryID} ::= {aggrDataTable 1 } AggrDataEntry ::= SEQUENCE { aggrDataRecord AggrMOValue, aggrDataRecordCompressed AggrMOCompressedValue, aggrDataErrorRecord AggrMOErrorStatus } aggrDataRecord OBJECT-TYPE SYNTAX AggrMOValue MAX-ACCESS read-only STATUS current DESCRIPTION "The snapshot value of the aggregated MO. Note that the access privileges to this object will be governed by the access privileges of the component objects. Thus, an entity attempting to access an instance of this MO MUST have access rights to all the component instance objects and this MO instance. " ::= { aggrDataEntry 1} aggrDataRecordCompressed OBJECT-TYPE SYNTAX AggrMOCompressedValue MAX-ACCESS read-only STATUS current DESCRIPTION "The compressed value of the aggregated MO. The compression algorithm will depend on the aggrCtlCompressionAlgorithm given in the corresponding aggrCtlEntry. If the value of the corresponding aggrCtlCompressionAlgorithm is (1) 'none', then the value of all instances of this object will be a string of zero length. Note that the access privileges to this object will be governed by the access privileges of the component objects. Thus, an entity attempting to access an instance of this MO MUST have access rights to all the component instance objects and this MO instance. " ::= { aggrDataEntry 2} aggrDataErrorRecord OBJECT-TYPE SYNTAX AggrMOErrorStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The error status corresponding to the MO instances aggregated in aggrDataRecord (and aggrDataRecordCompressed)." ::= { aggrDataEntry 3} -- Conformance information aggrConformance OBJECT IDENTIFIER ::= { aggrMIB 4 } aggrGroups OBJECT IDENTIFIER ::= { aggrConformance 1 } aggrCompliances OBJECT IDENTIFIER ::= { aggrConformance 2 } -- Compliance statements aggrMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities that implement the AGGREGATE-MIB." MODULE -- this module MANDATORY-GROUPS { aggrMibBasicGroup } ::= { aggrCompliances 1 } -- Units of conformance aggrMibBasicGroup OBJECT-GROUP OBJECTS { aggrCtlMOIndex, aggrCtlMODescr, aggrCtlCompressionAlgorithm, aggrCtlEntryOwner, aggrCtlEntryStorageType, aggrCtlEntryStatus, aggrMOInstance, aggrMODescr, aggrMOEntryStorageType, aggrMOEntryStatus, aggrDataRecord, aggrDataRecordCompressed, aggrDataErrorRecord } STATUS current DESCRIPTION "A collection of objects for aggregation of MOs." ::= { aggrGroups 1 } END