APPLICATION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter64, Counter32, Gauge32, mib-2, Unsigned32, zeroDotZero FROM SNMPv2-SMI DateAndTime, TEXTUAL-CONVENTION, TestAndIncr, TDomain, TimeStamp, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF LongUtf8String, sysApplElmtRunIndex FROM SYSAPPL-MIB; applicationMib MODULE-IDENTITY LAST-UPDATED "9811171815Z" ORGANIZATION "Application MIB Working Group" CONTACT-INFO "http://www.ietf.org/html.charters/applmib-charter.html Randy Presuhn BMC Software, Inc. 965 Stewart Drive Sunnyvale, CA 94086 USA Telephone: +1 408 616-3100 Facsimile: +1 408 616-3101 EMail: [email protected] " DESCRIPTION "This MIB defines objects representing generic aspects of applications that are of interest to management but typically require instrumentation within managed application elements. " ::= { mib-2 62 } -- -- Registration hierarchy for this MIB -- applicationMibObjects OBJECT IDENTIFIER ::= { applicationMib 1 } applicationMibConformance OBJECT IDENTIFIER ::= { applicationMib 2 } -- -- Groups defined in this MIB -- applServiceGroup OBJECT IDENTIFIER ::= { applicationMibObjects 1 } applChannelGroup OBJECT IDENTIFIER ::= { applicationMibObjects 2 } applPastChannelGroup OBJECT IDENTIFIER ::= { applicationMibObjects 3 } applElmtRunControlGroup OBJECT IDENTIFIER ::= { applicationMibObjects 4 } Unsigned64TC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A non-negative 64-bit bit integer, without counter semantics." SYNTAX Counter64 ApplTAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a transport service address. For snmpUDPDomain, an ApplTAddress is 6 octets long, the initial 4 octets containing the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order. Consult 'Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)' for further information on snmpUDPDomain." SYNTAX OCTET STRING (SIZE (0..255)) -- **************************************************************** -- -- applServiceGroup - -- -- The service-level tables permit the identification of one -- or more instances of named services on a system, and the -- association of running application elements to services. -- -- **************************************************************** -- **************************************************************** -- -- The service name to service instance table -- -- **************************************************************** applSrvNameToSrvInstTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplSrvNameToSrvInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service name to service instance table uses service name as its primary key, and service instance identifier as its secondary key. It facilitates the identification and lookup of the instances of a given service in a system." ::= { applServiceGroup 1 } applSrvNameToSrvInstEntry OBJECT-TYPE SYNTAX ApplSrvNameToSrvInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applSrvNameToSrvInstEntry identifies an instance of a given service. The allocation and reservation of unique values for applSrvIndex is an administrative issue. An applSrvNameToSrvInstEntry exists for the lifetime of that instance of that service; the index values may not change during that lifetime. " INDEX { applSrvName, applSrvIndex } ::= { applSrvNameToSrvInstTable 1 } ApplSrvNameToSrvInstEntry ::= SEQUENCE { applSrvInstQual SnmpAdminString } applSrvInstQual OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of applSrcInstQual provides additional information about this particular instance of this service. Although not used for indexing purposes, the value of this attribute should be sufficiently unique to be helpful to an administrator in distinguishing among service instances. " ::= { applSrvNameToSrvInstEntry 1 } -- **************************************************************** -- -- Service instance to Service Name table -- -- **************************************************************** applSrvInstToSrvNameTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplSrvInstToSrvNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service instance to service name table uses service instance identifier as its primary key, and service name as its secondary key. Given a service instance identifier, it facilitates the lookup of the name of the service being provided." ::= { applServiceGroup 2 } applSrvInstToSrvNameEntry OBJECT-TYPE SYNTAX ApplSrvInstToSrvNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applSrvInstToSrvNameEntry maps a service instance identifier back to a service name." INDEX { applSrvIndex, applSrvName } ::= { applSrvInstToSrvNameTable 1 } ApplSrvInstToSrvNameEntry ::= SEQUENCE { applSrvName SnmpAdminString } applSrvName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The human-readable name of a service. Where appropriate, as in the case where a service can be identified in terms of a single protocol, the strings should be established names such as those assigned by IANA and found in STD 2 [13], or defined by some other authority. In some cases private conventions apply and the string should in these cases be consistent with these non-standard conventions. An applicability statement may specify the service name(s) to be used. " ::= { applSrvInstToSrvNameEntry 1 } -- **************************************************************** -- -- The service instance to running application element table -- -- **************************************************************** applSrvInstToRunApplElmtTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplSrvInstToRunApplElmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The service instance to running application element table uses the service instance identifier as its primary key, and the running application element index as its secondary key. This facilitates the identification of the set of running application elements providing a given instance of a service." ::= { applServiceGroup 3 } applSrvInstToRunApplElmtEntry OBJECT-TYPE SYNTAX ApplSrvInstToRunApplElmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applSrvInstToRunApplElmtEntry identifies a running application element providing an instance of a service. Note that there may be multiple running application elements involved in the provision of an instance of a service." INDEX { applSrvIndex, sysApplElmtRunIndex } ::= { applSrvInstToRunApplElmtTable 1 } ApplSrvInstToRunApplElmtEntry ::= SEQUENCE { applSrvIndex Unsigned32 } applSrvIndex OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "An applSrvIndex is the system-unique identifier of an instance of a service. The value is unique not only across all instances of a given service, but also across all services in a system. Re-use of values for this index should be avoided. No two service instances in a given system shall concurrently have the same value for this index. The value zero is excluded from the set of permitted values for this index. This allows other tables to potentially represent things which cannot be associated with a specific service instance. " ::= { applSrvInstToRunApplElmtEntry 1 } -- **************************************************************** -- -- The running application element to service instance table -- -- **************************************************************** applRunApplElmtToSrvInstTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplRunApplElmtToSrvInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The running application element to service instance table uses the running application element index as its primary key and the service instance identifier as its secondary key. It identifies the set of services provided by a given running application element." ::= { applServiceGroup 4 } applRunApplElmtToSrvInstEntry OBJECT-TYPE SYNTAX ApplRunApplElmtToSrvInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applRunApplElmtToSrvInstEntry serves to identify an instance of a service being provided by a given running application element. Note that a particular running application element may provide multiple services." INDEX { sysApplElmtRunIndex, applSrvInstance } ::= { applRunApplElmtToSrvInstTable 1 } ApplRunApplElmtToSrvInstEntry ::= SEQUENCE { applSrvInstance Unsigned32 } applSrvInstance OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "An applSrvInstance is the system-unique identifier of an instance of a service. The value is unique not only across all instances of a given service, but also across all services. Re-use of values for this index should be avoided. No two service instances in a given system shall concurrently have the same value for this index. The value zero is excluded from the set of permitted values for this index. This allows other tables to potentially represent things which cannot be associated with a specific service instance. This attribute is semantically identical to applSrvIndex." ::= { applRunApplElmtToSrvInstEntry 1 } -- **************************************************************** -- -- applChannelGroup - group with tables for I/O -- -- In this group, the common abstraction is the Channel. -- Channels are realized as files or connections. -- The information flowing on a channel can always be -- measured in terms of a byte stream. Furthermore, for many -- channels, this information may also be measured in terms -- of transactions. -- -- For all of these tables, the first two indexes determines -- whether what is being measured is for a single running -- application element or for an instance of a service. -- -- The second index identifies the running application element -- or service instance. -- -- The third index is the channel id, which uniquely identifies -- a channel within the context of a running application element -- or service instance. -- -- Any remaining indexes are table-specific. -- -- **************************************************************** -- **************************************************************** -- -- applOpenChannelTable - Table of Open Channels -- -- **************************************************************** applOpenChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplOpenChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applOpenChannelTable reports information on open channels for running application elements and for service instances. This table is indexed by applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex. This effectively groups all entries for a given running application element or service instance together. ApplChannelIndex uniquely identifies an open channel (and, consequently, a file or connection) within the context of a particular running application element or service instance. Some of the information in this table is available through both sixty-four and thirty-two bit counters. The sixty-four bit counters are not accessible in protocols that do not support this data type." ::= { applChannelGroup 1 } applOpenChannelEntry OBJECT-TYPE SYNTAX ApplOpenChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applOpenChannelEntry indicates that a channel has been opened by this running application element or service instance and is still open. Note that if a file has been opened multiple times, even by the same process, it will have multiple channel entries." INDEX { applElmtOrSvc, applElmtOrSvcId, applOpenChannelIndex } ::= { applOpenChannelTable 1 } ApplOpenChannelEntry ::= SEQUENCE { applElmtOrSvc INTEGER, applElmtOrSvcId Unsigned32, applOpenChannelIndex Unsigned32, applOpenChannelOpenTime TimeStamp, applOpenChannelReadRequests Counter64, applOpenChannelReadRequestsLow Counter32, applOpenChannelReadFailures Counter32, applOpenChannelBytesRead Counter64, applOpenChannelBytesReadLow Counter32, applOpenChannelLastReadTime DateAndTime, applOpenChannelWriteRequests Counter64, applOpenChannelWriteRequestsLow Counter32, applOpenChannelWriteFailures Counter32, applOpenChannelBytesWritten Counter64, applOpenChannelBytesWrittenLow Counter32, applOpenChannelLastWriteTime DateAndTime } applElmtOrSvc OBJECT-TYPE SYNTAX INTEGER { service(1), element(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applElmtOrSvc attribute serves as an index for tables that can hold information both for individual running application elements as well as for service instances. If the value is service(1), the row contains information gathered at the level of a service. If the value is element(2), the row contains information for an individual running application element." ::= { applOpenChannelEntry 1 } applElmtOrSvcId OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applElmtOrSvcId attribute is used as an index in conjunction with the applElmtOrSvc attribute. When the value of applElmtOrSvc is service(1), this attribute's value corresponds to that of applSrvIndex, when the value of applElmtOrSvc is element(2), this attribute's value corresponds to sysApplElmtRunIndex." ::= { applOpenChannelEntry 2 } applOpenChannelIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute serves to uniquely identify this open connection in the context of the running application element or service instance. Where suitable, the application's native descriptor number should be used." ::= { applOpenChannelEntry 3 } applOpenChannelOpenTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the value of sysUpTime.0 when this channel was opened and this entry was added to this table. This attribute serves as a discontinuity indicator for the counter attributes in this entry and for any corresponding entries in the applOpenConnectionTable, applOpenFileTable, and the applTransactionStreamTable." ::= { applOpenChannelEntry 4 } applOpenChannelReadRequests OBJECT-TYPE SYNTAX Counter64 UNITS "read requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of read requests for this channel. All read requests for this channel by this entity, regardless of completion status, are included in this count. Read requests are counted in terms of system calls, rather than API calls. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 5 } applOpenChannelReadRequestsLow OBJECT-TYPE SYNTAX Counter32 UNITS "read requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the low thirty-two bits of applOpenChannelReadRequests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 6 } applOpenChannelReadFailures OBJECT-TYPE SYNTAX Counter32 UNITS "failed read requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of failed read requests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 7 } applOpenChannelBytesRead OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of bytes read from this channel. Only bytes successfully read are included in this count. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 8 } applOpenChannelBytesReadLow OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applOpenChannelBytesRead. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 9 } applOpenChannelLastReadTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time of the most recent read request made by this entity, regardless of completion status, for this open channel. If no read requests have been made the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applOpenChannelEntry 10 } applOpenChannelWriteRequests OBJECT-TYPE SYNTAX Counter64 UNITS "write requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of write requests for this channel made by this entity. All write requests for this channel, regardless of completion status, are included in this count. Write requests are counted in terms of system calls, rather than API calls. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 11 } applOpenChannelWriteRequestsLow OBJECT-TYPE SYNTAX Counter32 UNITS "write requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applOpenChannelWriteRequests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 12 } applOpenChannelWriteFailures OBJECT-TYPE SYNTAX Counter32 UNITS "failed write requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of failed write requests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 13 } applOpenChannelBytesWritten OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of bytes written to this channel. Only bytes successfully written (without errors reported by the system to the API in use by the application) are included in this count. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 14 } applOpenChannelBytesWrittenLow OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applOpenChannelBytesWritten. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry." ::= { applOpenChannelEntry 15 } applOpenChannelLastWriteTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time of the most recent write request made by this running application element or service instance, regardless of completion status, for this open channel. If no write requests have been made, the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applOpenChannelEntry 16 } -- **************************************************************** -- -- applOpenFileTable - Table of Open Files -- -- **************************************************************** applOpenFileTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplOpenFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applOpenFileTable reports information on open files for service instances or application elements. This table is indexed by applElmtOrSvc and applElmtOrSvcId, effectively grouping all entries for a given running service instance or application element together, and by applOpenChannelIndex, uniquely identifying an open channel (and, consequently, a file) within the context of a particular service instance or application element. Elements in this table correspond to elements in the applOpenChannelTable that represent files. For rows in the applOpenChannelTable that do not represent files, corresponding rows in this table will not exist." ::= { applChannelGroup 2 } applOpenFileEntry OBJECT-TYPE SYNTAX ApplOpenFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applOpenFileEntry indicates that a file has been opened by this running application element and is still open. Note that if a file has been opened multiple times, even by the same process, it will have multiple entries." INDEX { applElmtOrSvc, applElmtOrSvcId, applOpenChannelIndex } ::= { applOpenFileTable 1 } ApplOpenFileEntry ::= SEQUENCE { applOpenFileName LongUtf8String, applOpenFileSizeHigh Unsigned32, applOpenFileSizeLow Unsigned32, applOpenFileMode INTEGER } applOpenFileName OBJECT-TYPE SYNTAX LongUtf8String MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the name of this open file. Wherever practical, a fully qualified path name should be reported. The values 'stdin', 'stdout', and 'stderr' are reserved in accordance with common usage when the fully qualified path name cannot be determined." ::= { applOpenFileEntry 1 } applOpenFileSizeHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "2^32 byte blocks" MAX-ACCESS read-only STATUS current DESCRIPTION "This file's current size in 2^32 byte blocks. For example, for a file with a total size of 4,294,967,296 bytes, this attribute would have a value of 1; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 0." ::= { applOpenFileEntry 2 } applOpenFileSizeLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This file's current size modulo 2^32 bytes. For example, for a file with a total size of 4,294,967,296 bytes this attribute would have a value of 0; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 4,294,967,295." ::= { applOpenFileEntry 3 } applOpenFileMode OBJECT-TYPE SYNTAX INTEGER { read(1), write(2), readWrite(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the current mode of this file from the perspective of this running application element. These values have the following meanings: read(1) - file opened for reading only write(2) - file opened for writing only readWrite(3) - file opened for read and write. These values correspond to the POSIX/ANSI C library function fopen() 'type' parameter, using the following mappings: r -> read(1) w -> write(2) a -> write(2) + -> readWrite(3) " ::= { applOpenFileEntry 4 } -- **************************************************************** -- -- applOpenConnectionTable - Open Connection Table -- -- **************************************************************** applOpenConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplOpenConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applOpenConnectionTable provides information about open and listening connections from the perspective of a running application element or service instance. Entries in this table are indexed by applElmtOrSvc, applElmtOrSvcID, and by applOpenChannelIndex, which serves to uniquely identify each connection in the context of a service instance or running application element. For each row in this table, a corresponding row will exist in the applOpenChannel table. For rows in the applOpenChannelTable which do not represent open or listening connections, no corresponding rows will exist in this table." ::= { applChannelGroup 3 } applOpenConnectionEntry OBJECT-TYPE SYNTAX ApplOpenConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applOpenConnectionEntry indicates that a running application element or service instance has an open connection. The entry has information describing that connection. In the case of a TCP transport, the element applOpenConnectionNearEndAddr and that row's applOpenConnectionFarEndAddr would correspond to a tcpConnEntry. For a UDP transport, a similar relationship exists with respect to a udpEntry." INDEX { applElmtOrSvc, applElmtOrSvcId, applOpenChannelIndex } ::= { applOpenConnectionTable 1 } ApplOpenConnectionEntry ::= SEQUENCE { applOpenConnectionTransport TDomain, applOpenConnectionNearEndAddr ApplTAddress, applOpenConnectionNearEndpoint SnmpAdminString, applOpenConnectionFarEndAddr ApplTAddress, applOpenConnectionFarEndpoint SnmpAdminString, applOpenConnectionApplication SnmpAdminString } applOpenConnectionTransport OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "The applOpenConnectionTransport attribute identifies the transport protocol in use for this connection. If it is not practical to determine the underlying transport, this attribute's value shall have a value of {0 0}." DEFVAL { zeroDotZero } ::= { applOpenConnectionEntry 1 } applOpenConnectionNearEndAddr OBJECT-TYPE SYNTAX ApplTAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The applOpenConnectionNearEndAddr attribute reports the transport address and port information for the near end of this connection. If the value is not known, the value has a length of zero." DEFVAL { "" } ::= { applOpenConnectionEntry 2 } applOpenConnectionNearEndpoint OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applOpenConnectionNearEndpoint attribute reports the fully-qualified domain name and port information for the near end of this connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If the value is not known, the value has a length of zero." DEFVAL { "" } ::= { applOpenConnectionEntry 3 } applOpenConnectionFarEndAddr OBJECT-TYPE SYNTAX ApplTAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The applOpenConnectionFarEndAddr attribute reports the transport address and port information for the far end of this connection. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string." DEFVAL { "" } ::= { applOpenConnectionEntry 4 } applOpenConnectionFarEndpoint OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applOpenConnectionFarEndpoint attribute reports the fully-qualified domain name and port information for the far end of this connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string." DEFVAL { "" } ::= { applOpenConnectionEntry 5 } applOpenConnectionApplication OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applOpenConnectionApplication attribute identifies the application layer protocol in use. If not known, the value of this attribute shall be a zero-length string. When possible, protocol names should be those used in the 'ASSIGNED NUMBERS' [13]. For example, an SMTP mail server would use 'SMTP'." DEFVAL { "" } ::= { applOpenConnectionEntry 6 } -- **************************************************************** -- -- applTransactionStreamTable - common -- information for transaction stream monitoring -- -- **************************************************************** applTransactionStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplTransactionStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applTransactionStreamTable contains common information for transaction statistic accumulation." ::= { applChannelGroup 4 } applTransactionStreamEntry OBJECT-TYPE SYNTAX ApplTransactionStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applTransactionStreamEntry contains information for a single transaction stream. A transaction stream can be a network connection, file, or other source of transactions." INDEX { applElmtOrSvc, applElmtOrSvcId, applOpenChannelIndex } ::= { applTransactionStreamTable 1 } ApplTransactionStreamEntry ::= SEQUENCE { applTransactStreamDescr SnmpAdminString, applTransactStreamUnitOfWork SnmpAdminString, applTransactStreamInvokes Counter64, applTransactStreamInvokesLow Counter32, applTransactStreamInvCumTimes Counter32, applTransactStreamInvRspTimes Counter32, applTransactStreamPerforms Counter64, applTransactStreamPerformsLow Counter32, applTransactStreamPrfCumTimes Counter32, applTransactStreamPrfRspTimes Counter32 } applTransactStreamDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactStreamDescr attribute provides a human-readable description of this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string." DEFVAL { "" } ::= { applTransactionStreamEntry 1 } applTransactStreamUnitOfWork OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactStreamUnitOfWork attribute provides a human-readable definition of what the unit of work is for this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string." DEFVAL { "" } ::= { applTransactionStreamEntry 2 } applTransactStreamInvokes OBJECT-TYPE SYNTAX Counter64 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "Cumulative count of requests / invocations issued. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 3 } applTransactStreamInvokesLow OBJECT-TYPE SYNTAX Counter32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "This counter corresponds to the low thirty-two bits of applTransactStreamInvokes. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 4 } applTransactStreamInvCumTimes OBJECT-TYPE SYNTAX Counter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactStreamInvCumTimes attribute reports the cumulative sum of the lengths of the intervals measured between the transmission of requests and the receipt of (the first of) the corresponding response(s). Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 5 } applTransactStreamInvRspTimes OBJECT-TYPE SYNTAX Counter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactStreamInvRspTimes attribute reports the cumulative sum of the lengths of the intervals measured between the receipt of the first and last of multiple responses to a request. For transaction streams which do not permit multiple responses to a single request, this attribute will be constant. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 6 } applTransactStreamPerforms OBJECT-TYPE SYNTAX Counter64 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "Cumulative count of transactions performed. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 7 } applTransactStreamPerformsLow OBJECT-TYPE SYNTAX Counter32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "This counter reports the low thirty-two bits of applTransactStreamPerforms. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 8 } applTransactStreamPrfCumTimes OBJECT-TYPE SYNTAX Counter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactStreamPrfCumTimes attribute reports the cumulative sum of the interval lengths measured between receipt of requests and the transmission of the corresponding responses. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 9 } applTransactStreamPrfRspTimes OBJECT-TYPE SYNTAX Counter32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For each transaction performed, the elapsed time between when the first response is enqueued and when the last response is enqueued is added to this cumulative sum. For single-response protocols, the value of applTransactStreamPrfRspTimes will be constant. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactionStreamEntry 10 } -- **************************************************************** -- -- applTransactFlowTable -- -- **************************************************************** applTransactFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplTransactFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applTransactFlowTable contains entries, organized by application instance or running application element, direction of flow, and type (request/response) for each open transaction stream. The simple model of a transaction used here looks like this: invoker | Request | performer | - - - - - - > | | | | Response | | < - - - - - - | | | Since in some protocols it is possible for an entity to take on both the invoker and performer roles, information here is accumulated for transmitted and received requests, as well as for transmitted and received responses. Counts are maintained for both transactions and bytes transferred." ::= { applChannelGroup 5 } applTransactFlowEntry OBJECT-TYPE SYNTAX ApplTransactFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applTransactFlowEntry reports transaction throughput information for requests or response in a particular direction (transmit / receive) for a transaction stream. Entries in this table correspond to those in the applTransactionStreamTable with identical values for the applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex. For all counter objects in one of these entries, the corresponding (same value for applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex) applOpenChannelOpenTime object serves as a discontinuity indicator. " INDEX { applElmtOrSvc, applElmtOrSvcId, applOpenChannelIndex, applTransactFlowDirection, applTransactFlowReqRsp } ::= { applTransactFlowTable 1 } ApplTransactFlowEntry ::= SEQUENCE { applTransactFlowDirection INTEGER, applTransactFlowReqRsp INTEGER, applTransactFlowTrans Counter64, applTransactFlowTransLow Counter32, applTransactFlowBytes Counter64, applTransactFlowBytesLow Counter32, applTransactFlowTime DateAndTime } applTransactFlowDirection OBJECT-TYPE SYNTAX INTEGER { transmit(1), receive(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applTransactFlowDirection index serves to identify an entry as containing information pertaining to the transmit (1) or receive (2) flow of a transaction stream." ::= { applTransactFlowEntry 1 } applTransactFlowReqRsp OBJECT-TYPE SYNTAX INTEGER { request(1), response(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the applTransactFlowReqRsp index indicates whether this entry contains information on requests (1), or responses (2)." ::= { applTransactFlowEntry 2 } applTransactFlowTrans OBJECT-TYPE SYNTAX Counter64 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactFlowTrans attribute reports the number of request/response transactions (as indicated by the applTransactFlowReqRsp index) received/generated (as indicated by the applTransactFlowDirection index) that this service instance or running application element has processed for this transaction stream. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactFlowEntry 3 } applTransactFlowTransLow OBJECT-TYPE SYNTAX Counter32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applTransactFlowTrans. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactFlowEntry 4 } applTransactFlowBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactFlowBytes attribute reports the number of request/response (as indicated by the applTransactFlowReqRsp index) bytes received/generated (as indicated by the applTransactFlowDirection index) handled by this application element or service instance on this transaction stream. All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactFlowEntry 5 } applTransactFlowBytesLow OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applTransactFlowBytes. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactFlowEntry 6 } applTransactFlowTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactFlowTime attribute records the time of the processing (receipt or transmission as indicated by the applTransactFlowDirection index) by this running application element or service instance of the most recent request/response (as indicated by the applTransactFlowReqRsp index) on this transaction stream. If no requests/responses been received/transmitted by this entity over this transaction stream, the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applTransactFlowEntry 7 } -- **************************************************************** -- -- applTransactKindTable - transaction statistics broken down -- according to the kinds of transactions in each direction -- for a transaction stream. -- -- **************************************************************** applTransactKindTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplTransactKindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applTransactKindTable provides transaction statistics broken down by kinds of transaction. The definition of the kinds of transactions is specific to the application protocol in use, and may be documented in the form of an applicability statement. " ::= { applChannelGroup 6 } applTransactKindEntry OBJECT-TYPE SYNTAX ApplTransactKindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applTransactKindEntry reports information for a specific service instance or running application element's use of a specific transaction stream in a particular direction in requests or responses (as indicated by the applTransactFlowReqRsp index) broken down by transaction kind, as indicated by the applTransactKind index. Discontinuities in any of the counters in an entry can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." INDEX { applElmtOrSvc, applElmtOrSvcId, applOpenChannelIndex, applTransactFlowDirection, applTransactFlowReqRsp, applTransactKind } ::= { applTransactKindTable 1 } ApplTransactKindEntry ::= SEQUENCE { applTransactKind SnmpAdminString, applTransactKindTrans Counter64, applTransactKindTransLow Counter32, applTransactKindBytes Counter64, applTransactKindBytesLow Counter32, applTransactKindTime DateAndTime } applTransactKind OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1 .. 32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applTransactKind index is the human-readable identifier for a particular transaction kind within the context of an application protocol. The values to be used for a particular protocol may be identified in an applicability statement." ::= { applTransactKindEntry 1 } applTransactKindTrans OBJECT-TYPE SYNTAX Counter64 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactKindTrans attribute reports the number of request/response (as indicated by the applTransactFlowReqRsp index) transactions received/generated (as indicated by the applTransactFlowDirection index) handled by this application instance or application element on this transaction stream for this transaction kind. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactKindEntry 2 } applTransactKindTransLow OBJECT-TYPE SYNTAX Counter32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactKindTransLow attribute reports the low thirty-two bits of applTransactKindTrans. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactKindEntry 3 } applTransactKindBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactKindBytes attribute reports the number of request/response (as indicated by the applTransactFlowReqRsp index) bytes received/generated (as indicated by the applTransactFlowDirection index) handled by this application element on this transaction stream for this transaction kind. All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactKindEntry 4 } applTransactKindBytesLow OBJECT-TYPE SYNTAX Counter32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactKindBytesLow attribute corresponds to the low thirty-two bits of applTransactKindBytes. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime." ::= { applTransactKindEntry 5 } applTransactKindTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The applTransactKindTime attribute records the time of the processing (receipt or transmission as indicated by the applTransactFlowDirection index) by this running application element or service instance of the most recent request/response (as indicated by the applTransactFlowReqRsp index) of this kind of transaction on this transaction stream. If no requests/responses of this kind been received/transmitted by this running application element or service instance over this transaction stream, the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applTransactKindEntry 6 } -- **************************************************************** -- -- applPastChannelGroup - logged information on former channels. -- These tables control the collection of channel history -- information and represent the accumulated historical data. -- -- **************************************************************** applPastChannelControlTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastChannelControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastChannelControlTable controls the accumulation of history information about channels from the perspective of service instances and running application elements. Entries in this table are indexed by applElmtOrSvc and applElmtOrSvcId, giving control of channel history accumulation at the level of each service instance and running application element." ::= { applPastChannelGroup 1 } applPastChannelControlEntry OBJECT-TYPE SYNTAX ApplPastChannelControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastChannelControlEntry provides the ability to control the retention of channel history information by service instances and running application elements." INDEX { applElmtOrSvc, applElmtOrSvcId } ::= { applPastChannelControlTable 1 } ApplPastChannelControlEntry ::= SEQUENCE { applPastChannelControlCollect INTEGER, applPastChannelControlMaxRows Unsigned32, applPastChannelControlTimeLimit Unsigned32, applPastChannelControlRemItems Counter32 } applPastChannelControlCollect OBJECT-TYPE SYNTAX INTEGER { enabled (1), frozen (2), disabled (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the value of applPastChannelControlCollect is 'enabled', each time the corresponding running application element or service instance closes an open channel a new entry will be added to the applPastChannelTable. When the value of applPastChannelControlCollect is 'frozen', no new entries are added to the applPastChannelTable for this running application element or service instance, and old entries are not aged out. When the value of applPastChannelControlCollect is 'disabled', all entries are removed from applPastChannelTable for this running application or service instance, and no new entries are added." DEFVAL { enabled } ::= { applPastChannelControlEntry 1 } applPastChannelControlMaxRows OBJECT-TYPE SYNTAX Unsigned32 UNITS "channel history entries" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of entries allowed in the applPastChannelTable for this running application element or service instance. Once the number of rows for this running application element or service instance in the applPastChannelTable reaches this value, when new entries are to be added the management subsystem will make room for them by removing the oldest entries. Entries will be removed on the basis of oldest applPastChannelCloseTime value first." DEFVAL { 500 } ::= { applPastChannelControlEntry 2 } applPastChannelControlTimeLimit OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time in seconds which an entry for this running application element or service instance may exist in the applPastChannelTable before it is removed. Any entry that is older than this value will be removed (aged out) from the table, unless the applPastChannelControlCollect is set to 'frozen'. Note that an entry may be aged out prior to reaching this time limit if it is the oldest entry in the table and must be removed to make space for a new entry so as to not exceed applPastChannelControlMaxRows, or if the applPastChannelControlCollect is set to 'disabled'." DEFVAL { 7200 } ::= { applPastChannelControlEntry 3 } applPastChannelControlRemItems OBJECT-TYPE SYNTAX Counter32 UNITS "channel history entries" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastChannelControlRemItems attribute reports the number of applPastChannelControlTable entries for this running application element or service instance that were deleted in order to make room for new history entries. This count does NOT include entries deleted for the following reasons: - the corresponding applPastChannelControlCollect attribute has been set to 'disabled' - the entry has been in the table longer that the time limit indicated by the corresponding applPastChannelControlTimeLimit. " ::= { applPastChannelControlEntry 4 } -- **************************************************************** -- -- applPastChannelTable - Table of former channels -- -- **************************************************************** applPastChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastChannelTable provides history information about channels from the perspective of running application elements and service instances. Entries in this table are indexed by applElmtOrSvc, applElmtOrSvcId, and by applPastChannelIndex, which serves to uniquely identify each former channel in the context of a running application element or service instance. Note that the value of applPastChannelIndex is independent of the value applOpenChannelIndex had when this channel was open. Entries for closed channels for a given running application element or service instance can be added to this table only if its entry in the applPastChannelControlTable has the value 'enabled' for the attribute applPastChannelControlCollect. Entries for closed channels are removed under the following circumstances: - the running application element or service instance no longer exists - the corresponding applPastChannelControlCollect attribute has been set to 'disabled' - the entry has been in the table longer that the time limit indicated by the corresponding applPastChannelControlTimeLimit and the value of applPastChannelControlCollect is not 'frozen' - this is the oldest entry for the running application element or service instance in question and the addition of a new element would otherwise cause applPastChannelControlMaxRows to be exceeded for this running application element or service instance. - a value of applPastChannelIndex has been re-used. Note that under normal circumstances, this is unlikely. Removal/replacement of an entry under the last two conditions causes the corresponding applPastChannelControlRemItems to be incremented." ::= { applPastChannelGroup 2 } applPastChannelEntry OBJECT-TYPE SYNTAX ApplPastChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastChannelEntry indicates that a running application element or service instance once had an open channel, which is now closed. The entry has information describing that channel." INDEX { applElmtOrSvc, applElmtOrSvcId, applPastChannelIndex } ::= { applPastChannelTable 1 } ApplPastChannelEntry ::= SEQUENCE { applPastChannelIndex Unsigned32, applPastChannelOpenTime DateAndTime, applPastChannelCloseTime DateAndTime, applPastChannelReadRequests Unsigned64TC, applPastChannelReadReqsLow Unsigned32, applPastChannelReadFailures Unsigned32, applPastChannelBytesRead Unsigned64TC, applPastChannelBytesReadLow Unsigned32, applPastChannelLastReadTime DateAndTime, applPastChannelWriteRequests Unsigned64TC, applPastChannelWriteReqsLow Unsigned32, applPastChannelWriteFailures Unsigned32, applPastChannelBytesWritten Unsigned64TC, applPastChannelBytesWritLow Unsigned32, applPastChannelLastWriteTime DateAndTime } applPastChannelIndex OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute serves to uniquely identify this closed channel in the context of the running application element or service instance. This attribute has no other semantics. Note that the value of applPastChannelIndex is independent of the value applOpenChannelIndex had when this channel was active. In issuing this index value, the implementation must avoid re-issuing an index value which has already been assigned to an entry which has not yet been deleted due to age or space considerations. The value zero is excluded from the set of permitted values for this index in order to permit other tables to possibly represent information that cannot be associated with a specific entry in this table. " ::= { applPastChannelEntry 1 } applPastChannelOpenTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the time when this channel was originally opened. Note that this information is quite different from applOpenChannelOpenTime, which is used for the detection of counter discontinuities." ::= { applPastChannelEntry 2 } applPastChannelCloseTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the time when this channel was closed." ::= { applPastChannelEntry 3 } applPastChannelReadRequests OBJECT-TYPE SYNTAX Unsigned64TC UNITS "read requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the number of read requests for this channel made by this running application element or service instance. All read requests for this channel by this running application element or service instance, regardless of completion status, are included in this count. Read requests are counted in terms of system calls, rather than API calls." ::= { applPastChannelEntry 4 } applPastChannelReadReqsLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "read requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applPastChannelReadRequests." ::= { applPastChannelEntry 5 } applPastChannelReadFailures OBJECT-TYPE SYNTAX Unsigned32 UNITS "failed read requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of failed read requests." ::= { applPastChannelEntry 6 } applPastChannelBytesRead OBJECT-TYPE SYNTAX Unsigned64TC UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of bytes read from this channel by this running application element or service instance. Only bytes successfully read are included in this count. " ::= { applPastChannelEntry 7 } applPastChannelBytesReadLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applPastChannelBytesRead." ::= { applPastChannelEntry 8 } applPastChannelLastReadTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the time of the most recent read request made by this running application element or service instance regardless of completion status, for this former channel. If no read requests have been made , the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applPastChannelEntry 9 } applPastChannelWriteRequests OBJECT-TYPE SYNTAX Unsigned64TC UNITS "write requests" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastChannelWriteRequests attribute reports the number of write requests, regardless of completion status, made by this running application element or service instance for this former channel. Write requests are counted in terms of system calls, rather than API calls." ::= { applPastChannelEntry 10 } applPastChannelWriteReqsLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "write requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applPastChannelWriteRequests." ::= { applPastChannelEntry 11 } applPastChannelWriteFailures OBJECT-TYPE SYNTAX Unsigned32 UNITS "failed write requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of failed write requests." ::= { applPastChannelEntry 12 } applPastChannelBytesWritten OBJECT-TYPE SYNTAX Unsigned64TC UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute reports the number of bytes written to this former channel by this running application element or service instance. Only bytes successfully written (no errors reported by the API in use by the application) are included in this count." ::= { applPastChannelEntry 13 } applPastChannelBytesWritLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applPastChannelBytesWritten." ::= { applPastChannelEntry 14 } applPastChannelLastWriteTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastChannelLastWriteTime attribute reports the time of the most recent write request made by this running application element or service instance, regardless of completion status, for this former channel. If no write requests have been made the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applPastChannelEntry 15 } -- **************************************************************** -- -- applPastFileTable - information specific to former files -- -- **************************************************************** applPastFileTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastFileTable supplements the applPastChannelTable for entries corresponding to channels which were files. The indexing structure is identical to applPastChannelTable. An entry exists in the applPastFileTable only if there is a corresponding (same index values) entry in the applPastChannelTable and if the channel was a file. Entries for closed files are removed when the corresponding entries are removed from the applPastChannelTable." ::= { applPastChannelGroup 3 } applPastFileEntry OBJECT-TYPE SYNTAX ApplPastFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastFileEntry provides additional, file-specific information to complement the corresponding applPastChannelEntry for a channel which was a file." INDEX { applElmtOrSvc, applElmtOrSvcId, applPastChannelIndex } ::= { applPastFileTable 1 } ApplPastFileEntry ::= SEQUENCE { applPastFileName LongUtf8String, applPastFileSizeHigh Unsigned32, applPastFileSizeLow Unsigned32, applPastFileMode INTEGER } applPastFileName OBJECT-TYPE SYNTAX LongUtf8String MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the last known value of applOpenFileName before the channel was closed." ::= { applPastFileEntry 1 } applPastFileSizeHigh OBJECT-TYPE SYNTAX Unsigned32 UNITS "2^32 byte blocks" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the value of applOpenFileSizeHigh at the time this channel was closed. For example, for a file with a total size of 4,294,967,296 bytes, this attribute would have a value of 1; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 0." ::= { applPastFileEntry 2 } applPastFileSizeLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the value of applOpenFileSizeLow at the time this channel was closed. For example, for a file with a total size of 4,294,967,296 bytes this attribute would have a value of 0; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 4,294,967,295." ::= { applPastFileEntry 3 } applPastFileMode OBJECT-TYPE SYNTAX INTEGER { read(1), write(2), readWrite(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute records the value of applOpenFileMode at the time this channel was closed. " ::= { applPastFileEntry 4 } -- **************************************************************** -- -- applPastConTable - information specific to former connections -- -- **************************************************************** applPastConTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastConEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastConTable supplements the applPastChannelTable for entries corresponding to channels which were connections. The indexing structure is identical to applPastChannelTable. An entry exists in the applPastConTable only if there is a corresponding (same index values) entry in the applPastChannelTable and if the channel was a connection. Entries for closed connections are removed when the corresponding entries are removed from the applPastChannelTable." ::= { applPastChannelGroup 4 } applPastConEntry OBJECT-TYPE SYNTAX ApplPastConEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastConEntry provides additional, connection-specific information to complement the corresponding applPastChannelEntry for a channel which was a connection." INDEX { applElmtOrSvc, applElmtOrSvcId, applPastChannelIndex } ::= { applPastConTable 1 } ApplPastConEntry ::= SEQUENCE { applPastConTransport TDomain, applPastConNearEndAddr ApplTAddress, applPastConNearEndpoint SnmpAdminString, applPastConFarEndAddr ApplTAddress, applPastConFarEndpoint SnmpAdminString, applPastConApplication SnmpAdminString } applPastConTransport OBJECT-TYPE SYNTAX TDomain MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastConTransport attribute identifies the transport protocol that was in use for this former connection. If the transport protocol could not be determined, the value { 0 0 } shall be used." DEFVAL { zeroDotZero } ::= { applPastConEntry 1 } applPastConNearEndAddr OBJECT-TYPE SYNTAX ApplTAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastConNearEndAddr attribute reports the transport address and port information for the near end of this former connection. If the information could not be determined, the value shall be a zero-length string." DEFVAL { "" } ::= { applPastConEntry 2 } applPastConNearEndpoint OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastConNearEndpoint attribute reports the fully-qualified domain name and port information for the near end of this former connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If the information could not be determined, the value shall be a zero-length string." DEFVAL { "" } ::= { applPastConEntry 3 } applPastConFarEndAddr OBJECT-TYPE SYNTAX ApplTAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastConFarEnd attribute reports the transport address and port information for the far end of this former connection. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string." DEFVAL { "" } ::= { applPastConEntry 4 } applPastConFarEndpoint OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastConFarEndpoint attribute reports the transport address and port information for the far end of this former connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string." DEFVAL { "" } ::= { applPastConEntry 5 } applPastConApplication OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastConApplication attribute identifies the application layer protocol that was in use. Where possible, the values defined in [13] shall be used. If not known, the value of this attribute shall be a zero-length string." DEFVAL { "" } ::= { applPastConEntry 6 } -- **************************************************************** -- -- applPastTransStreamTable - historical -- information for transaction stream monitoring -- -- **************************************************************** applPastTransStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastTransStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastTransStreamTable contains common information for historical transaction statistics." ::= { applPastChannelGroup 5 } applPastTransStreamEntry OBJECT-TYPE SYNTAX ApplPastTransStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastTransStreamEntry contains information for a single former transaction stream. A transaction stream could have been a network connection, file, or other source of transactions." INDEX { applElmtOrSvc, applElmtOrSvcId, applPastChannelIndex } ::= { applPastTransStreamTable 1 } ApplPastTransStreamEntry ::= SEQUENCE { applPastTransStreamDescr SnmpAdminString, applPastTransStreamUnitOfWork SnmpAdminString, applPastTransStreamInvokes Unsigned64TC, applPastTransStreamInvokesLow Unsigned32, applPastTransStreamInvCumTimes Unsigned32, applPastTransStreamInvRspTimes Unsigned32, applPastTransStreamPerforms Unsigned64TC, applPastTransStreamPerformsLow Unsigned32, applPastTransStreamPrfCumTimes Unsigned32, applPastTransStreamPrfRspTimes Unsigned32 } applPastTransStreamDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransStreamDescr attribute provides a human-readable description of this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string." DEFVAL { "" } ::= { applPastTransStreamEntry 1 } applPastTransStreamUnitOfWork OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransStreamUnitOfWork attribute provides a human-readable definition of what the unit of work is for this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string." DEFVAL { "" } ::= { applPastTransStreamEntry 2 } applPastTransStreamInvokes OBJECT-TYPE SYNTAX Unsigned64TC UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "Cumulative count of requests / invocations issued for this transaction stream when it was active." ::= { applPastTransStreamEntry 3 } applPastTransStreamInvokesLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "This object corresponds to the low thirty-two bits of applPastTransStreamInvokes." ::= { applPastTransStreamEntry 4 } applPastTransStreamInvCumTimes OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransStreamInvCumTimes attribute reports the cumulative sum of the lengths of the intervals times measured between the transmission of requests and the receipt of (the first of) the corresponding response(s)." ::= { applPastTransStreamEntry 5 } applPastTransStreamInvRspTimes OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransStreamInvRspTimes attribute reports the cumulative sum of the lengths of the intervals measured between the receipt of the first and last of multiple responses to a request. For transaction streams which do not permit multiple responses to a single request, this attribute will be zero." ::= { applPastTransStreamEntry 6 } applPastTransStreamPerforms OBJECT-TYPE SYNTAX Unsigned64TC UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transactions performed." ::= { applPastTransStreamEntry 7 } applPastTransStreamPerformsLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "This objecy reports the low thirty-two bits of applPastTransStreamPerforms." ::= { applPastTransStreamEntry 8 } applPastTransStreamPrfCumTimes OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransStreamPrfCumTimes attribute reports the cumulative sum of the lengths of the intervals measured between receipt of requests and the transmission of the corresponding responses." ::= { applPastTransStreamEntry 9 } applPastTransStreamPrfRspTimes OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "For each transaction performed, the elapsed time between when the first response is enqueued and when the last response is enqueued is added to this cumulative sum. For single-response protocols, the value of applPastTransStreamPrfRspTimes will be zero." ::= { applPastTransStreamEntry 10 } -- **************************************************************** -- -- applPastTransFlowTable -- -- **************************************************************** applPastTransFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastTransFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastTransFlowTable contains entries, organized by application instance or running application element, direction of flow, and type (request/response) for each former transaction stream. The simple model of a transaction used here looks like this: invoker | Request | performer | - - - - - - > | | | | Response | | < - - - - - - | | | Since in some protocols it is possible for an entity to take on both the invoker and performer roles, information here is accumulated for transmitted and received requests, as well as for transmitted and received responses. Counts are maintained for both transactions and bytes transferred." ::= { applPastChannelGroup 6 } applPastTransFlowEntry OBJECT-TYPE SYNTAX ApplPastTransFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastTransFlowEntry records transaction throughput information for requests or response in a particular direction (transmit / receive) for a transaction stream. Entries in this table correspond to those in the applPastTransStreamTable with identical values for the applElmtOrSvc, applElmtOrSvcId, and the applPastChannelIndex." INDEX { applElmtOrSvc, applElmtOrSvcId, applPastChannelIndex, applPastTransFlowDirection, applPastTransFlowReqRsp } ::= { applPastTransFlowTable 1 } ApplPastTransFlowEntry ::= SEQUENCE { applPastTransFlowDirection INTEGER, applPastTransFlowReqRsp INTEGER, applPastTransFlowTrans Unsigned64TC, applPastTransFlowTransLow Unsigned32, applPastTransFlowBytes Unsigned64TC, applPastTransFlowBytesLow Unsigned32, applPastTransFlowTime DateAndTime } applPastTransFlowDirection OBJECT-TYPE SYNTAX INTEGER { transmit(1), receive(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastTransFlowDirection index serves to identify an entry as containing information pertaining to the transmit (1) or receive (2) flow of a past transaction stream. This index corresponds to applTransactFlowDirection." ::= { applPastTransFlowEntry 1 } applPastTransFlowReqRsp OBJECT-TYPE SYNTAX INTEGER { request(1), response(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the applPastTransFlowReqRsp index indicates whether this entry contains information on requests (1), or responses (2). This index corresponds to applTransactFlowReqRsp." ::= { applPastTransFlowEntry 2 } applPastTransFlowTrans OBJECT-TYPE SYNTAX Unsigned64TC UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransFlowTrans attribute reports the number of request/response (as indicated by the applPastTransFlowReqRsp index) transactions received/generated (as indicated by the applPastTransFlowDirection index) handled on this transaction stream." ::= { applPastTransFlowEntry 3 } applPastTransFlowTransLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applPastTransFlowTrans." ::= { applPastTransFlowEntry 4 } applPastTransFlowBytes OBJECT-TYPE SYNTAX Unsigned64TC UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransFlowBytes attribute reports the number of request/response (as indicated by the applPastTransFlowReqRsp index) bytes received/generated (as indicated by the applPastTransFlowDirection index) handled on this transaction stream. All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead." ::= { applPastTransFlowEntry 5 } applPastTransFlowBytesLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute corresponds to the low thirty-two bits of applPastTransFlowBytes." ::= { applPastTransFlowEntry 6 } applPastTransFlowTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransFlowTime attribute records the time of the processing (receipt or transmission as indicated by the applPastTransFlowDirection index) of the last request/response (as indicated by the applPastTransFlowReqRsp index) on this transaction stream. If no requests/responses been received/transmitted by this entity over this transaction stream, the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applPastTransFlowEntry 7 } -- **************************************************************** -- -- applPastTransKindTable - transaction statistics broken down -- according to the kinds of transactions in each direction -- for a transaction stream. -- -- **************************************************************** applPastTransKindTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplPastTransKindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastTransKindTable provides transaction statistics broken down by kinds of transaction. The definition of the kinds of transactions is specific to the application protocol in use, and may be documented in the form of an applicability statement. " ::= { applPastChannelGroup 7 } applPastTransKindEntry OBJECT-TYPE SYNTAX ApplPastTransKindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applPastTransKindEntry reports historical data for a specific service instance or running application element's use of a specific transaction stream in a particular direction in requests or responses (as indicated by the applPastTransFlowReqRsp index) broken down by transaction kind, as indicated by the applPastTransKind index." INDEX { applElmtOrSvc, applElmtOrSvcId, applPastChannelIndex, applPastTransFlowDirection, applPastTransFlowReqRsp, applPastTransKind } ::= { applPastTransKindTable 1 } ApplPastTransKindEntry ::= SEQUENCE { applPastTransKind SnmpAdminString, applPastTransKindTrans Unsigned64TC, applPastTransKindTransLow Unsigned32, applPastTransKindBytes Unsigned64TC, applPastTransKindBytesLow Unsigned32, applPastTransKindTime DateAndTime } applPastTransKind OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1 .. 32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The applPastTransKind index is the human-readable identifier for a particular transaction kind within the context of an application protocol. The values to be used for a particular protocol may be identified in an applicability statement. This index corresponds to applTransactKind." ::= { applPastTransKindEntry 1 } applPastTransKindTrans OBJECT-TYPE SYNTAX Unsigned64TC UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "For this transaction stream, this attribute records the total number of transactions of the type identified by the indexes. The type is characterized according to the receive/transmit direction (applPastTransFlowDirecton), whether it was a request or a response (applPastTransFlowReqRsp), and the protocol-specific transaction kind (applPastTransKind). stream for this transaction kind." ::= { applPastTransKindEntry 2 } applPastTransKindTransLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "transactions" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransKindTransLow attribute reports the low thirty-two bits of applPastTransKindTrans." ::= { applPastTransKindEntry 3 } applPastTransKindBytes OBJECT-TYPE SYNTAX Unsigned64TC UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "For this transaction stream and transaction kind, the applPastTransKindBytes attribute reports the number of bytes received or generated (as indicated by the applPastTransFlowDirection index) in requests or responses (as indicated by the applPastTransFlowReqRsp index). All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead." ::= { applPastTransKindEntry 4 } applPastTransKindBytesLow OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransKindBytesLow attribute corresponds to the low thirty-two bits of applPastTransKindBytes." ::= { applPastTransKindEntry 5 } applPastTransKindTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The applPastTransKindTime attribute records the time of the processing (receipt or transmission as indicated by the applPastTransFlowDirection index) of the last request/response (as indicated by the applPastTransFlowReqRsp index) of this kind of transaction on this transaction stream. If no requests/responses of this kind were received/transmitted over this transaction stream, the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applPastTransKindEntry 6 } -- **************************************************************** -- -- applElmtRunControlGroup - monitor and control running -- application elements -- -- **************************************************************** applElmtRunStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplElmtRunStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information on running application elements, complementing information available in the correspondingly indexed sysApplElmtRunTable [31]." ::= { applElmtRunControlGroup 1 } applElmtRunStatusEntry OBJECT-TYPE SYNTAX ApplElmtRunStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applElmtRunStatusEntry contains information to support the control and monitoring of a single running application element." INDEX { sysApplElmtRunIndex } ::= { applElmtRunStatusTable 1 } ApplElmtRunStatusEntry ::= SEQUENCE { applElmtRunStatusSuspended TruthValue, applElmtRunStatusHeapUsage Unsigned32, applElmtRunStatusOpenConnections Unsigned32, applElmtRunStatusOpenFiles Gauge32, applElmtRunStatusLastErrorMsg SnmpAdminString, applElmtRunStatusLastErrorTime DateAndTime } applElmtRunStatusSuspended OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The applElmtRunStatusSuspended attribute reports whether processing by this running application element has been suspended, whether by management request or by other means." ::= { applElmtRunStatusEntry 1 } applElmtRunStatusHeapUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The applElmtRunStatusHeapUsage reports the current approximate heap usage by this running application element." ::= { applElmtRunStatusEntry 2 } applElmtRunStatusOpenConnections OBJECT-TYPE SYNTAX Unsigned32 UNITS "connections" MAX-ACCESS read-only STATUS current DESCRIPTION "The applElmtRunStatusOpenConnections attribute reports the current number of open connections in use by this running application element." ::= { applElmtRunStatusEntry 3 } applElmtRunStatusOpenFiles OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS current DESCRIPTION "The applElmtRunStatusOpenFiles attribute reports the current number of open files in use by this running application element." ::= { applElmtRunStatusEntry 4 } applElmtRunStatusLastErrorMsg OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The applElmtRunStatusLastErrorMessage attribute reports the most recent error message (typically written to stderr or a system error logging facility) from this running application element. If no such message has yet been generated, the value of this attribute shall be a zero-length string." DEFVAL { "" } ::= { applElmtRunStatusEntry 5 } applElmtRunStatusLastErrorTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The applElmtRunStatusLastErrorTime attribute reports the time of the most recent error message in applElmtRunStatusLastErrorMsg. If no such message has yet been generated, the value of this attribute shall be '0000000000000000'H " DEFVAL { '0000000000000000'H } ::= { applElmtRunStatusEntry 6 } -- **************************************************************** -- -- applElmtRunControlTable - control running application -- elements -- -- **************************************************************** applElmtRunControlTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplElmtRunControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides the ability to control application elements, complementing information available in the correspondingly indexed sysApplElmtRunTable [31]." ::= { applElmtRunControlGroup 2 } applElmtRunControlEntry OBJECT-TYPE SYNTAX ApplElmtRunControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An applElmtRunControlEntry contains information to support the control of a single running application element." INDEX { sysApplElmtRunIndex } ::= { applElmtRunControlTable 1 } ApplElmtRunControlEntry ::= SEQUENCE { applElmtRunControlSuspend TruthValue, applElmtRunControlReconfigure TestAndIncr, applElmtRunControlTerminate TruthValue } applElmtRunControlSuspend OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this variable to 'true' requests the suspension of processing by this running application element. Setting this variable to 'false' requests that processing be resumed. The effect, if any, will be reported by the applElmtRunStatusSuspended attribute." DEFVAL { false } ::= { applElmtRunControlEntry 1 } applElmtRunControlReconfigure OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "Changing the value of this variable requests that the running application element re-load its configuration (like SIGHUP for many UNIX-based daemons). Note that completion of a SET on this object only implies that configuration reload was initiated, not necessarily that the reload has been completed." ::= { applElmtRunControlEntry 2 } applElmtRunControlTerminate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the value of applElmtRunControlTerminate to 'true' requests that the running application element terminate processing and exit in an orderly manner. This is a 'polite' shutdown request. When read, this object's value will be 'false' except when orderly termination is in progress. Note that completion of a SET on this object only implies that termination was initiated, not necessarily that the termination has been completed." DEFVAL { false } ::= { applElmtRunControlEntry 3 } -- **************************************************************** -- -- Conformance requirements -- -- **************************************************************** applicationMibGroups OBJECT IDENTIFIER ::= { applicationMibConformance 1} applicationMonitorGroup OBJECT-GROUP OBJECTS { applSrvInstQual, applSrvName, applSrvIndex, applSrvInstance, applOpenChannelOpenTime, applOpenChannelReadRequestsLow, applOpenChannelReadFailures, applOpenChannelBytesReadLow, applOpenChannelLastReadTime, applOpenChannelWriteRequestsLow, applOpenChannelWriteFailures, applOpenChannelBytesWrittenLow, applOpenChannelLastWriteTime, applOpenFileName, applOpenFileSizeHigh, applOpenFileSizeLow, applOpenFileMode, applOpenConnectionTransport, applOpenConnectionNearEndAddr, applOpenConnectionNearEndpoint, applOpenConnectionFarEndAddr, applOpenConnectionFarEndpoint, applOpenConnectionApplication } STATUS current DESCRIPTION "This group represents the basic capabilities of this MIB." ::= { applicationMibGroups 1 } applicationFastMonitorGroup OBJECT-GROUP OBJECTS { applOpenChannelReadRequests, applOpenChannelBytesRead, applOpenChannelWriteRequests, applOpenChannelBytesWritten } STATUS current DESCRIPTION "This group comprises 64-bit counters mandatory in high-throughput environments, where 32-bit counters could wrap in less than an hour." ::= { applicationMibGroups 2 } applicationTransactGroup OBJECT-GROUP OBJECTS { applTransactStreamDescr, applTransactStreamUnitOfWork, applTransactStreamInvokesLow, applTransactStreamInvCumTimes, applTransactStreamInvRspTimes, applTransactStreamPerformsLow, applTransactStreamPrfCumTimes, applTransactStreamPrfRspTimes, applTransactFlowTransLow, applTransactFlowBytesLow, applTransactFlowTime, applTransactKindTransLow, applTransactKindBytesLow, applTransactKindTime } STATUS current DESCRIPTION "This group comprises objects appropriate from monitoring transaction-structured flows." ::= { applicationMibGroups 3 } applicationFastTransactGroup OBJECT-GROUP OBJECTS { applTransactStreamInvokes, applTransactStreamPerforms, applTransactFlowTrans, applTransactFlowBytes, applTransactKindTrans, applTransactKindBytes } STATUS current DESCRIPTION "This group comprises 64-bit transaction counters required in high-throughput environments, where 32-bit counters could wrap in less than an hour." ::= { applicationMibGroups 4 } applicationHistoryGroup OBJECT-GROUP OBJECTS { applPastChannelControlCollect, applPastChannelControlMaxRows, applPastChannelControlTimeLimit, applPastChannelControlRemItems, applPastChannelOpenTime, applPastChannelCloseTime, applPastChannelReadReqsLow, applPastChannelReadFailures, applPastChannelBytesReadLow, applPastChannelLastReadTime, applPastChannelWriteReqsLow, applPastChannelWriteFailures, applPastChannelBytesWritLow, applPastChannelLastWriteTime, applPastFileName, applPastFileSizeHigh, applPastFileSizeLow, applPastFileMode, applPastConTransport, applPastConNearEndAddr, applPastConNearEndpoint, applPastConFarEndAddr, applPastConFarEndpoint, applPastConApplication} STATUS current DESCRIPTION "This group models basic historical data." ::= { applicationMibGroups 5 } applicationFastHistoryGroup OBJECT-GROUP OBJECTS { applPastChannelReadRequests, applPastChannelBytesRead, applPastChannelWriteRequests, applPastChannelBytesWritten} STATUS current DESCRIPTION "This group comprises additional 64-bit objects required for recording historical data in high-volume environments, where a 32-bit integer would be insufficient." ::= { applicationMibGroups 6 } applicationTransHistoryGroup OBJECT-GROUP OBJECTS { applPastTransStreamDescr, applPastTransStreamUnitOfWork, applPastTransStreamInvokesLow, applPastTransStreamInvCumTimes, applPastTransStreamInvRspTimes, applPastTransStreamPerformsLow, applPastTransStreamPrfCumTimes, applPastTransStreamPrfRspTimes, applPastTransFlowTransLow, applPastTransFlowBytesLow, applPastTransFlowTime, applPastTransKindTransLow, applPastTransKindBytesLow, applPastTransKindTime } STATUS current DESCRIPTION "This group represents historical data for transaction- structured information streams." ::= { applicationMibGroups 7 } applicationFastTransHistoryGroup OBJECT-GROUP OBJECTS { applPastTransFlowTrans, applPastTransFlowBytes, applPastTransKindTrans, applPastTransKindBytes, applPastTransStreamPerforms, applPastTransStreamInvokes } STATUS current DESCRIPTION "This group contains 64-bit objects required for historical records on high-volume transaction-structured streams, where 32-bit integers would be insufficient." ::= { applicationMibGroups 8 } applicationRunGroup OBJECT-GROUP OBJECTS { applElmtRunStatusSuspended, applElmtRunStatusHeapUsage, applElmtRunStatusOpenConnections, applElmtRunStatusOpenFiles, applElmtRunStatusLastErrorMsg, applElmtRunStatusLastErrorTime, applElmtRunControlSuspend, applElmtRunControlReconfigure, applElmtRunControlTerminate } STATUS current DESCRIPTION "This group represents extensions to the system application MIB." ::= { applicationMibGroups 9 } applicationMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the application MIB." MODULE MANDATORY-GROUPS { applicationMonitorGroup, applicationHistoryGroup, applicationRunGroup } OBJECT applPastChannelControlCollect MIN-ACCESS read-only DESCRIPTION "This object should be limited to read-only access in environments with inadequate security." OBJECT applPastChannelControlMaxRows MIN-ACCESS read-only DESCRIPTION "This object should be limited to read-only access in environments with inadequate security." OBJECT applPastChannelControlTimeLimit MIN-ACCESS read-only DESCRIPTION "This object should be limited to read-only access in environments with inadequate security." OBJECT applElmtRunControlSuspend MIN-ACCESS read-only DESCRIPTION "This object should be limited to read-only access in environments with inadequate security." OBJECT applElmtRunControlReconfigure MIN-ACCESS read-only DESCRIPTION "This object should be limited to read-only access in environments with inadequate security." OBJECT applElmtRunControlTerminate MIN-ACCESS read-only DESCRIPTION "This object should be limited to read-only access in environments with inadequate security." GROUP applicationTransactGroup DESCRIPTION "The applicationTransactGroup is required when the information stream processed has a transaction structure. " GROUP applicationTransHistoryGroup DESCRIPTION "The applicationTransHistoryGroup must be implemented if applicationTransactGroup and applicationHistoryGroup are implemented." GROUP applicationFastMonitorGroup DESCRIPTION "The applicationFastMonitorGroup is mandatory when the applicationMonitorGroup is implemented and its counts group may exceed what can be represented in 32 bits." GROUP applicationFastTransactGroup DESCRIPTION "The applicationFastTransactGroup is mandatory when the applicationTransactGroup is implemented and its counts may exceed what can be represented in 32 bits." GROUP applicationFastHistoryGroup DESCRIPTION "The applicationFastHistoryGroup is mandatory when the applicationHistoryGroup is implemented and its counts may exceed what can be represented in 32 bits." GROUP applicationFastTransHistoryGroup DESCRIPTION "The applicationFastTransHistoryGroup is mandatory when the applicationTransHistoryGroup is implemented and its counts may exceed what can be represented in 32 bits." ::= { applicationMibConformance 2 } END