COPS-CLIENT-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------------------- -- ------------------------------------------------------------- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, Unsigned32, mib-2 FROM SNMPv2-SMI TimeStamp, TimeInterval, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InetAddressType, InetAddress FROM INET-ADDRESS-MIB; -- REFERENCE -- "The COPS (Common Open Policy Service) Protocol RFC 2748 copsClientMIB MODULE-IDENTITY LAST-UPDATED "200009280000Z" ORGANIZATION "IETF RSVP Admission Policy Working Group" CONTACT-INFO " Andrew Smith (WG co-chair) Phone: +1 408 579 2821 Email: [email protected] Mark Stevens (WG co-chair) Phone: +1 978 287 9102 Email: [email protected] Editor: Andrew Smith Phone: +1 408 579 2821 Email: [email protected] Editor: David Partain Phone: +46 13 28 41 44 Email: [email protected] Editor: John Seligson Phone: +1 408 495 2992 Email: [email protected]" DESCRIPTION "The COPS Client MIB module" REVISION "200009280000Z" DESCRIPTION "This version published as RFC 2940" ::= { mib-2 89 } copsClientMIBObjects OBJECT IDENTIFIER ::= { copsClientMIB 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- CopsClientState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value indicating the state of a COPS client." SYNTAX INTEGER { copsClientInvalid(1), -- default state. copsClientTcpconnected(2), -- TCP connection up but COPS -- not yet open. copsClientAuthenticating(3), -- TCP connection up but still -- authenticating. copsClientSecAccepted(4), -- connection authenticated. copsClientAccepted(5), -- COPS server accepted client. copsClientTimingout(6) -- Keepalive timer has expired, -- client is in process of -- tearing down connection. } CopsServerEntryType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value indicating how a COPS server entry came into existence." SYNTAX INTEGER { copsServerStatic(1), -- configured by manager copsServerRedirect(2) -- notified by COPS server } CopsErrorCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value describing a COPS protocol error. Codes are identical to those used by the COPS protocol itself." SYNTAX INTEGER { errorOther(0), -- none of the below errorBadHandle(1), errorInvalidHandleReference(2), errorBadMessageFormat(3), errorUnableToProcess(4), errorMandatoryClientSiMissing(5), errorUnsupportedClientType(6), errorMandatoryCopsObjectMissing(7), errorClientFailure(8), errorCommunicationFailure(9), errorUnspecified(10), -- client-type specific subcode errorShuttingDown(11), errorRedirectToPreferredServer(12), errorUnknownCopsObject(13), errorAuthenticationFailure(14), errorAuthenticationMissing(15) } -- REFERENCE -- "RFC 2748 section 2.2.8" CopsTcpPort ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value indicating a TCP protocol port number." SYNTAX INTEGER (0..65535) CopsAuthType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value indicating a type of security authentication mechanism." SYNTAX INTEGER { authNone(0), authOther(1), authIpSecAh(2), authIpSecEsp(3), authTls(4), authCopsIntegrity(5) } -- ------------------------------------------------------------- copsClientCapabilitiesGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 1 } -- ------------------------------------------------------------- -- -- Capabilities of the COPS client to connect to a COPS server: -- copsClientCapabilities OBJECT-TYPE SYNTAX BITS { copsClientVersion1(0), -- supports version1 of COPS protocol copsClientAuthIpSecAh(1) , -- supports IP-SEC Authentication copsClientAuthIpSecEsp(2), -- supports IP-SEC Encryption copsClientAuthTls(3), -- supports Transport-Layer Security copsClientAuthInteg(4) -- supports COPS Integrity } MAX-ACCESS read-only STATUS current DESCRIPTION "A list of the optional capabilities that this COPS client supports." ::= { copsClientCapabilitiesGroup 1 } -- ------------------------------------------------------------- copsClientStatusGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 2 } -- ------------------------------------------------------------- -- -- Current status of COPS server connections, all read-only. -- copsClientServerCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF CopsClientServerCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of information regarding COPS servers as seen from the point of view of a COPS client. This table contains entries for both statically-configured and dynamically-learned servers (from a PDP Redirect operation). One entry exists in this table for each COPS Client-Type served by the COPS server. In addition, an entry will exist with copsClientServerClientType 0 (zero) representing information about the underlying connection itself: this is consistent with the COPS specification which reserves this value for this purpose." ::= { copsClientStatusGroup 1 } copsClientServerCurrentEntry OBJECT-TYPE SYNTAX CopsClientServerCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of information regarding a single COPS server serving a single COPS Client-Type from the point of view of a COPS client." INDEX { copsClientServerAddressType, copsClientServerAddress, copsClientServerClientType } ::= { copsClientServerCurrentTable 1 } CopsClientServerCurrentEntry ::= SEQUENCE { copsClientServerAddressType InetAddressType, copsClientServerAddress InetAddress, copsClientServerClientType INTEGER, copsClientServerTcpPort CopsTcpPort, copsClientServerType CopsServerEntryType, copsClientServerAuthType CopsAuthType, copsClientServerLastConnAttempt TimeStamp, copsClientState CopsClientState, copsClientServerKeepaliveTime TimeInterval, copsClientServerAccountingTime TimeInterval, copsClientInPkts Counter32, copsClientOutPkts Counter32, copsClientInErrs Counter32, copsClientLastError CopsErrorCode, copsClientTcpConnectAttempts Counter32, copsClientTcpConnectFailures Counter32, copsClientOpenAttempts Counter32, copsClientOpenFailures Counter32, copsClientErrUnsupportClienttype Counter32, copsClientErrUnsupportedVersion Counter32, copsClientErrLengthMismatch Counter32, copsClientErrUnknownOpcode Counter32, copsClientErrUnknownCnum Counter32, copsClientErrBadCtype Counter32, copsClientErrBadSends Counter32, copsClientErrWrongObjects Counter32, copsClientErrWrongOpcode Counter32, copsClientKaTimedoutClients Counter32, copsClientErrAuthFailures Counter32, copsClientErrAuthMissing Counter32 } copsClientServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of address in copsClientServerAddress." ::= { copsClientServerCurrentEntry 1 } copsClientServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv4, IPv6 or DNS address of a COPS Server. Note that, since this is an index to the table, the DNS name must be short enough to fit into the maximum length of indices allowed by the management protocol in use." REFERENCE "RFC 2748 section 2.3" ::= { copsClientServerCurrentEntry 2 } copsClientServerClientType OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The COPS protocol Client-Type for which this entry applies. Multiple Client-Types can be served by a single COPS server. The value 0 (zero) indicates that this entry contains information about the underlying connection itself." REFERENCE "RFC 2748 section 6, IANA" ::= { copsClientServerCurrentEntry 3 } copsClientServerTcpPort OBJECT-TYPE SYNTAX CopsTcpPort MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number on the COPS server to which the client should connect/is connected." ::= { copsClientServerCurrentEntry 4 } copsClientServerType OBJECT-TYPE SYNTAX CopsServerEntryType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of the source of this COPS server information. COPS servers may be configured by network management into copsClientServerConfigTable and appear in this entry with type copsServerStatic(1). Alternatively, the may be notified from another COPS server by means of the COPS PDP-Redirect mechanism and appear as copsServerRedirect(2)." ::= { copsClientServerCurrentEntry 5 } copsClientServerAuthType OBJECT-TYPE SYNTAX CopsAuthType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicator of the current security mode in use between client and this COPS server." ::= { copsClientServerCurrentEntry 6 } copsClientServerLastConnAttempt OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last time that this client attempted to connect to this COPS server." ::= { copsClientServerCurrentEntry 7 } copsClientState OBJECT-TYPE SYNTAX CopsClientState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the connection and COPS protocol with respect to this COPS server." ::= { copsClientServerCurrentEntry 8 } copsClientServerKeepaliveTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the COPS protocol Keepalive timeout, in centiseconds, currently in use by this client, as specified by this COPS server in the Client-Accept operation. A value of zero indicates no keepalive activity is expected." REFERENCE "RFC 2748 section 3.7, 4.4" ::= { copsClientServerCurrentEntry 9 } copsClientServerAccountingTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the COPS protocol Accounting timeout, in centiseconds, currently in use by this client, as specified by the COPS server in the Client-Accept operation. A value of zero indicates no accounting activity is to be performed." REFERENCE "RFC 2748 section 3.7" ::= { copsClientServerCurrentEntry 10 } copsClientInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from this COPS server marked for this Client-Type. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 11 } copsClientOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has sent to this COPS server marked for this Client-Type. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 12 } copsClientInErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from this COPS server marked for this Client-Type that contained errors in syntax. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 13 } copsClientLastError OBJECT-TYPE SYNTAX CopsErrorCode MAX-ACCESS read-only STATUS current DESCRIPTION "The code contained in the last COPS protocol Error Object received by this client from this COPS server marked for this Client-Type. This value is not zeroed on COPS Client-Open operations." REFERENCE "RFC 2748 section 2.2.8" ::= { copsClientServerCurrentEntry 14 } copsClientTcpConnectAttempts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times that this COPS client has tried (successfully or otherwise) to open an TCP connection to a COPS server. This value is cumulative since agent restart and is not zeroed on new connections. This value is not incremented for entries representing a non-zero Client-Type." ::= { copsClientServerCurrentEntry 15 } copsClientTcpConnectFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times that this COPS client has failed to open an TCP connection to a COPS server. This value is cumulative since agent restart and is not zeroed on new connections. This value is not incremented for entries representing a non-zero Client-Type." ::= { copsClientServerCurrentEntry 16 } copsClientOpenAttempts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times that this COPS client has tried to perform a COPS Client-Open to a COPS server for this Client-Type. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 17 } copsClientOpenFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times that this COPS client has failed to perform a COPS Client-Open to a COPS server for this Client-Type. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 18 } copsClientErrUnsupportClienttype OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers that referred to Client-Types that are unsupported by this client. This value is cumulative since agent restart and is not zeroed on new connections. This value is not incremented for entries representing a non-zero Client-Type." ::= { copsClientServerCurrentEntry 19 } copsClientErrUnsupportedVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that had a COPS protocol Version number that is unsupported by this client. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 20 } copsClientErrLengthMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that had a COPS protocol Message Length that did not match the actual received message. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 21 } copsClientErrUnknownOpcode OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that had a COPS protocol Op Code that was unrecognised by this client. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 22 } copsClientErrUnknownCnum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that contained a COPS protocol object C-Num that was unrecognised by this client. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 23 } copsClientErrBadCtype OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that contained a COPS protocol object C-Type that was not defined for the C-Nums known by this client. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 24 } copsClientErrBadSends OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client attempted to send to COPS servers marked for this Client-Type that resulted in a transmit error. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 25 } copsClientErrWrongObjects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that did not contain a permitted set of COPS protocol objects. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 26 } copsClientErrWrongOpcode OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of COPS messages that this client has received from COPS servers marked for this Client-Type that had a COPS protocol Op Code that should not have been sent to a COPS client e.g. Open-Requests. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 27 } copsClientKaTimedoutClients OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of times that this client has been shut down for this Client-Type by COPS servers that had detected a COPS protocol Keepalive timeout. This value is cumulative since agent restart and is not zeroed on new connections." ::= { copsClientServerCurrentEntry 28 } copsClientErrAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of times that this client has received a COPS message marked for this Client-Type which could not be authenticated using the authentication mechanism used by this client." ::= { copsClientServerCurrentEntry 29 } copsClientErrAuthMissing OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the total number of times that this client has received a COPS message marked for this Client-Type which did not contain authentication information." ::= { copsClientServerCurrentEntry 30 } -- ------------------------------------------------------------- copsClientConfigGroup OBJECT IDENTIFIER ::= { copsClientMIBObjects 3 } -- ------------------------------------------------------------- copsClientServerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CopsClientServerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of possible COPS servers to try to connect to in order of copsClientServerConfigPriority. There may be multiple entries in this table for the same server and client-type which specify different security mechanisms: these mechanisms will be attempted by the client in the priority order given. Note that a server learned by means of PDPRedirect always takes priority over any of these configured entries." ::= { copsClientConfigGroup 1 } copsClientServerConfigEntry OBJECT-TYPE SYNTAX CopsClientServerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of configuration information regarding a single COPS server from the point of view of a COPS client." INDEX { copsClientServerConfigAddrType, copsClientServerConfigAddress, copsClientServerConfigClientType, copsClientServerConfigAuthType } ::= { copsClientServerConfigTable 1 } CopsClientServerConfigEntry ::= SEQUENCE { copsClientServerConfigAddrType InetAddressType, copsClientServerConfigAddress InetAddress, copsClientServerConfigClientType INTEGER, copsClientServerConfigAuthType CopsAuthType, copsClientServerConfigTcpPort CopsTcpPort, copsClientServerConfigPriority Integer32, copsClientServerConfigRowStatus RowStatus } copsClientServerConfigAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of address in copsClientServerConfigAddress." ::= { copsClientServerConfigEntry 1 } copsClientServerConfigAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv4, IPv6 or DNS address of a COPS Server. Note that, since this is an index to the table, the DNS name must be short enough to fit into the maximum length of indices allowed by the management protocol in use." REFERENCE "RFC 2748 section 2.3" ::= { copsClientServerConfigEntry 2 } copsClientServerConfigClientType OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The COPS protocol Client-Type for which this entry applies and for which this COPS server is capable of serving. Multiple Client-Types can be served by a single COPS server." REFERENCE "RFC 2748 section 6, IANA" ::= { copsClientServerConfigEntry 3 } copsClientServerConfigAuthType OBJECT-TYPE SYNTAX CopsAuthType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of authentication mechanism for this COPS client to request when negotiating security at the start of a connection to a COPS server." REFERENCE "RFC 2748 section 4." ::= { copsClientServerConfigEntry 4 } copsClientServerConfigTcpPort OBJECT-TYPE SYNTAX CopsTcpPort MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP port number on the COPS server to which the client should connect." ::= { copsClientServerConfigEntry 5 } copsClientServerConfigPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of this entry relative to other entries. COPS client will attempt to contact COPS servers for the appropriate Client-Type. Higher numbers are tried first. The order to be used amongst server entries with the same priority is undefined. COPS servers that are notified to the client using the COPS protocol PDP-Redirect mechanism are always used in preference to any entries in this table." ::= { copsClientServerConfigEntry 6 } copsClientServerConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "State of this entry in the table." ::= { copsClientServerConfigEntry 7 } copsClientServerConfigRetryAlgrm OBJECT-TYPE SYNTAX INTEGER { other(1), sequential(2), roundRobin(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The algorithm by which the client should retry when it fails to connect to a COPS server." DEFVAL { sequential } ::= { copsClientConfigGroup 2 } copsClientServerConfigRetryCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "A retry count for use by the retry algorithm. Each retry algorithm needs to specify how it uses this value. For the 'sequential(2)' algorithm, this value is the number of times the client should retry to connect to one COPS server before moving on to another. For the 'roundRobin(3)' algorithm, this value is not used." DEFVAL { 1 } ::= { copsClientConfigGroup 3 } copsClientServerConfigRetryIntvl OBJECT-TYPE SYNTAX TimeInterval UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "A retry interval for use by the retry algorithm. Each retry algorithm needs to specify how it uses this value. For the 'sequential(2)' algorithm, this value is the time to wait between retries of a connection to the same COPS server. For the 'roundRobin(3)' algorithm, the client always attempts to connect to each Server in turn, until one succeeds or they all fail; if they all fail, then the client waits for the value of this interval before restarting the algorithm." DEFVAL { 1000 } ::= { copsClientConfigGroup 4 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- copsClientConformance OBJECT IDENTIFIER ::= { copsClientMIB 2 } copsClientGroups OBJECT IDENTIFIER ::= { copsClientConformance 1 } copsClientCompliances OBJECT IDENTIFIER ::= { copsClientConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- copsDeviceStatusGroup OBJECT-GROUP OBJECTS { copsClientCapabilities, copsClientServerTcpPort, copsClientServerType, copsClientServerAuthType, copsClientServerLastConnAttempt, copsClientState, copsClientServerKeepaliveTime, copsClientServerAccountingTime, copsClientInPkts, copsClientOutPkts, copsClientInErrs, copsClientLastError, copsClientTcpConnectAttempts, copsClientTcpConnectFailures, copsClientOpenAttempts, copsClientOpenFailures, copsClientErrUnsupportClienttype, copsClientErrUnsupportedVersion, copsClientErrLengthMismatch, copsClientErrUnknownOpcode, copsClientErrUnknownCnum, copsClientErrBadCtype, copsClientErrBadSends, copsClientErrWrongObjects, copsClientErrWrongOpcode, copsClientKaTimedoutClients, copsClientErrAuthFailures, copsClientErrAuthMissing } STATUS current DESCRIPTION "A collection of objects for monitoring the status of connections to COPS servers and statistics for a COPS client." ::= { copsClientGroups 1 } copsDeviceConfigGroup OBJECT-GROUP OBJECTS { copsClientServerConfigTcpPort, copsClientServerConfigPriority, copsClientServerConfigRowStatus, copsClientServerConfigRetryAlgrm, copsClientServerConfigRetryCount, copsClientServerConfigRetryIntvl } STATUS current DESCRIPTION "A collection of objects for configuring COPS server information." ::= { copsClientGroups 2 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- copsClientCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for device support of management of the COPS client." MODULE MANDATORY-GROUPS { copsDeviceStatusGroup, copsDeviceConfigGroup } OBJECT copsClientServerConfigTcpPort MIN-ACCESS read-only DESCRIPTION "Write access is required only if the device supports the configuration of COPS server information." OBJECT copsClientServerConfigPriority MIN-ACCESS read-only DESCRIPTION "Write access is required only if the device supports the configuration of COPS server information." OBJECT copsClientServerConfigRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is required only if the device supports the configuration of COPS server information." OBJECT copsClientServerConfigRetryAlgrm MIN-ACCESS read-only DESCRIPTION "Write access is required only if the device supports the configuration of COPS server information." OBJECT copsClientServerConfigRetryCount MIN-ACCESS read-only DESCRIPTION "Write access is required only if the device supports the configuration of COPS server information." OBJECT copsClientServerConfigRetryIntvl MIN-ACCESS read-only DESCRIPTION "Write access is required only if the device supports the configuration of COPS server information." ::= { copsClientCompliances 1 } END