LMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, transmission, Unsigned32, Counter32, TimeTicks FROM SNMPv2-SMI -- RFC 2578 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC 2580 TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType, TimeStamp FROM SNMPv2-TC -- RFC 2579 InterfaceIndexOrZero, ifIndex FROM IF-MIB -- RFC 2863 InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC 4001 teLinkRemoteIpAddr, teLinkIncomingIfId, TeLinkEncodingType FROM TE-LINK-STD-MIB; -- RFC 4220 lmpMIB MODULE-IDENTITY LAST-UPDATED "200608140000Z" -- 14 August 2006 ORGANIZATION "Common Control and Measurement Protocols (CCAMP) Working Group" CONTACT-INFO " Martin Dubuc Email: [email protected] Thomas D. Nadeau Email: [email protected] Jonathan P. Lang Email: [email protected] Evan McGinnis Email: [email protected] Adrian Farrel Email: [email protected]" DESCRIPTION "Copyright (C) 2006 The Internet Society. This version of the MIB module is part of RFC 4631; see the RFC itself for full legal notices. This MIB module contains managed object definitions for the Link Management Protocol (LMP) as defined in 'Link Management Protocol'." -- Revision history. REVISION "200608140000Z" -- 14 August 2006 DESCRIPTION "Revised version: - Fixes textual descriptions of TruthValue settings such that True is always 1 and False is always 2. - Adds punctuation to REFERENCE clauses. This revision published as RFC 4631" REVISION "200601110000Z" -- 11 January 2006 DESCRIPTION "Initial version published as RFC 4327" ::= { transmission 227 } -- Textual Conventions LmpInterval ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The interval delay, in milliseconds." SYNTAX Unsigned32 (1..65535) LmpRetransmitInterval ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The retransmission interval delay in milliseconds." SYNTAX Unsigned32 (1..4294967295) LmpNodeId ::= TEXTUAL-CONVENTION DISPLAY-HINT "1d.1d.1d.1d" STATUS current DESCRIPTION "Represents a Node ID in network byte order. Node ID is an address of type IPv4." REFERENCE "Section 1.1 of Link Management Protocol, RFC 4204." SYNTAX OCTET STRING(SIZE(4)) -- Top level components of this MIB -- Notifications lmpNotifications OBJECT IDENTIFIER ::= { lmpMIB 0 } -- Tables, Scalars lmpObjects OBJECT IDENTIFIER ::= { lmpMIB 1 } -- Conformance lmpConformance OBJECT IDENTIFIER ::= { lmpMIB 2 } lmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired operational status of LMP on the node. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." DEFVAL { up } ::= { lmpObjects 1 } lmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual operational status of LMP on the node." ::= { lmpObjects 2 } -- LMP Neighbor Table lmpNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the neighbor node(s) to which control channels may be established." ::= { lmpObjects 3 } lmpNbrEntry OBJECT-TYPE SYNTAX LmpNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by a LMP-enabled device for every pair of nodes that can establish control channels." INDEX { lmpNbrNodeId } ::= { lmpNbrTable 1 } LmpNbrEntry ::= SEQUENCE { lmpNbrNodeId LmpNodeId, lmpNbrRetransmitInterval LmpRetransmitInterval, lmpNbrRetryLimit Unsigned32, lmpNbrRetransmitDelta Unsigned32, lmpNbrAdminStatus INTEGER, lmpNbrOperStatus INTEGER, lmpNbrRowStatus RowStatus, lmpNbrStorageType StorageType } lmpNbrNodeId OBJECT-TYPE SYNTAX LmpNodeId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a unique index for an entry in the LmpNbrTable. This value represents the remote Node ID." ::= { lmpNbrEntry 1 } lmpNbrRetransmitInterval OBJECT-TYPE SYNTAX LmpRetransmitInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the initial retransmission interval that is used for the retransmission of messages that require acknowledgement. This object, along with lmpNbrRetryLimit, is used to implement the congestion-handling mechanism defined in Section 10 of the Link Management Protocol specification, which is based on RFC 2914." REFERENCE "Link Management Protocol, RFC 4204. Congestion Control Principles, RFC 2914." DEFVAL { 500 } ::= { lmpNbrEntry 2 } lmpNbrRetryLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum number of times a message is transmitted without being acknowledged. A value of 0 is used to indicate that a node should never stop retransmission. This object, along with lmpNbrRetransmitInterval, is used to implement the congestion-handling mechanism as defined in Section 10 of the Link Management Protocol specification, which is based on RFC 2914." REFERENCE "Link Management Protocol, RFC 4204. Congestion Control Principles, RFC 2914." DEFVAL { 3 } ::= { lmpNbrEntry 3 } lmpNbrRetransmitDelta OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object governs the speed with which the sender increases the retransmission interval, as explained in Section 10 of the Link Management Protocol specification, which is based on RFC 2914. This value is a power used to express the exponential backoff. The ratio of two successive retransmission intervals is (1 + Delta)." REFERENCE "Link Management Protocol, RFC 4204. Congestion Control Principles, RFC 2914." DEFVAL { 1 } ::= { lmpNbrEntry 4 } lmpNbrAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The desired operational status of LMP to this remote node." ::= { lmpNbrEntry 5 } lmpNbrOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual operational status of LMP to this remote node." ::= { lmpNbrEntry 6 } lmpNbrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). All read-create objects must have valid and consistent values before the row can be activated." ::= { lmpNbrEntry 7 } lmpNbrStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the lmpNbrTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row." DEFVAL { nonVolatile } ::= { lmpNbrEntry 8 } -- End of lmpNbrTable lmpCcHelloIntervalDefault OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default value for the HelloInterval parameter used in the Hello protocol keep-alive phase. It indicates how frequently LMP Hello messages will be sent. It is used as the default value for lmpCcHelloInterval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpObjects 4 } lmpCcHelloIntervalDefaultMin OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default minimum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloIntervalMin. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 5 } lmpCcHelloIntervalDefaultMax OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default maximum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloIntervalMax. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 6 } lmpCcHelloDeadIntervalDefault OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how long a device should wait before declaring the control channel dead. The HelloDeadInterval parameter should be at least three times the value of HelloInterval. It is used as a default value for lmpCcHelloDeadInterval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpObjects 7 } lmpCcHelloDeadIntervalDefaultMin OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default minimum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMin. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 8 } lmpCcHelloDeadIntervalDefaultMax OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the default maximum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHelloDeadIntervalMax. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 9 } -- LMP Control Channel Table lmpControlChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpControlChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies LMP control channel information." ::= { lmpObjects 10 } lmpControlChannelEntry OBJECT-TYPE SYNTAX LmpControlChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LMP-enabled device for every control channel. Whenever a new entry is created with lmpCcIsIf set to true(1), a corresponding entry is created in ifTable as well (see RFC 2863)." INDEX { lmpCcId } ::= { lmpControlChannelTable 1 } LmpControlChannelEntry ::= SEQUENCE { lmpCcId Unsigned32, lmpCcUnderlyingIfIndex InterfaceIndexOrZero, lmpCcIsIf TruthValue, lmpCcNbrNodeId LmpNodeId, lmpCcRemoteId Unsigned32, lmpCcRemoteAddressType InetAddressType, lmpCcRemoteIpAddr InetAddress, lmpCcSetupRole INTEGER, lmpCcAuthentication TruthValue, lmpCcHelloInterval LmpInterval, lmpCcHelloIntervalMin LmpInterval, lmpCcHelloIntervalMax LmpInterval, lmpCcHelloIntervalNegotiated LmpInterval, lmpCcHelloDeadInterval LmpInterval, lmpCcHelloDeadIntervalMin LmpInterval, lmpCcHelloDeadIntervalMax LmpInterval, lmpCcHelloDeadIntervalNegotiated LmpInterval, lmpCcLastChange TimeTicks, lmpCcAdminStatus INTEGER, lmpCcOperStatus INTEGER, lmpCcRowStatus RowStatus, lmpCcStorageType StorageType } lmpCcId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This value represents the local control channel identifier. The control channel identifier is a non-zero 32-bit number." ::= { lmpControlChannelEntry 1 } lmpCcUnderlyingIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "If lmpCcIsIf is set to true(1), this object carries the index into the ifTable of the entry that represents the LMP interface over which LMP will transmit its traffic. If this object is set to zero but lmpCcIsIf is set to true(1), the control channel is not currently associated with any underlying interface, and the control channel's operational status must not be up(1); nor should the control channel forward or receive traffic. If lmpCcIsIf is set to false(2), this object should be set to zero and ignored." ::= { lmpControlChannelEntry 2 } lmpCcIsIf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "In implementations where the control channels are modeled as interfaces, the value of this object is true(1), and this control channel is represented by an interface in the interfaces group table as indicated by the value of lmpCcUnderlyingIfIndex. If control channels are not modeled as interfaces, the value of this object is false(2), and there is no corresponding interface for this control channel in the interfaces group table; the value of lmpCcUnderlyingIfIndex should be ignored." ::= { lmpControlChannelEntry 3 } lmpCcNbrNodeId OBJECT-TYPE SYNTAX LmpNodeId MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Node ID of the control channel remote node. This value either is configured or gets created by the node when a Config message is received or when an outgoing Config message is acknowledged by the remote node." ::= { lmpControlChannelEntry 4 } lmpCcRemoteId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the remote control channel identifier (32-bit number). It is determined during the negotiation phase. A value of zero means that the remote control channel identifier has not yet been learned." ::= { lmpControlChannelEntry 5 } lmpCcRemoteAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This value represents the remote control channel IP address type. In point-to-point configuration, this value can be set to unknown(0)." ::= { lmpControlChannelEntry 6 } lmpCcRemoteIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This value represents the remote control channel Internet address for numbered control channel. The type of this address is determined by lmpCcRemoteAddressType. The control channel must be numbered on non-point-to-point configuration. For point-to-point configuration, the remote control channel address can be of type unknown, in which case this object must be a zero-length string. The lmpCcRemoteId object then identifies the unnumbered address." ::= { lmpControlChannelEntry 7 } lmpCcSetupRole OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The role that this node should take during establishment of this control channel. An active node will initiate establishment. A passive node will wait for the remote node to initiate. A pair of nodes that both take the passive role will never establish communications." DEFVAL { active } ::= { lmpControlChannelEntry 8 } lmpCcAuthentication OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the control channel must use authentication." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpControlChannelEntry 9 } lmpCcHelloInterval OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the value of the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalDefault." ::= { lmpControlChannelEntry 10 } lmpCcHelloIntervalMin OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum value for the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMinDefault." ::= { lmpControlChannelEntry 11 } lmpCcHelloIntervalMax OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum value for the HelloInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMaxDefault." ::= { lmpControlChannelEntry 12 } lmpCcHelloIntervalNegotiated OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Once the control channel is active, this object represents the negotiated HelloInterval value." ::= { lmpControlChannelEntry 13 } lmpCcHelloDeadInterval OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the value of the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloDeadIntervalDefault." ::= { lmpControlChannelEntry 14 } lmpCcHelloDeadIntervalMin OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum value for the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloDeadIntervalMinDefault." ::= { lmpControlChannelEntry 15 } lmpCcHelloDeadIntervalMax OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the maximum value for the HelloDeadInterval parameter. The default value for this object should be set to lmpCcHelloIntervalMaxDefault." ::= { lmpControlChannelEntry 16 } lmpCcHelloDeadIntervalNegotiated OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Once the control channel is active, this object represents the negotiated HelloDeadInterval value." ::= { lmpControlChannelEntry 17 } lmpCcLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the control channel entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { lmpControlChannelEntry 18 } lmpCcAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The desired operational status of this control channel." ::= { lmpControlChannelEntry 19 } lmpCcOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), configSnd(3), configRcv(4), active(5), goingDown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual operational status of this control channel." ::= { lmpControlChannelEntry 20 } lmpCcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). All read-create objects must have valid and consistent values before the row can be activated." ::= { lmpControlChannelEntry 21 } lmpCcStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the lmpControlChannelTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row." DEFVAL { nonVolatile } ::= { lmpControlChannelEntry 22 } -- End of lmpControlChannelTable -- LMP Control Channel Performance Table lmpControlChannelPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpControlChannelPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies LMP control channel performance counters." ::= { lmpObjects 11 } lmpControlChannelPerfEntry OBJECT-TYPE SYNTAX LmpControlChannelPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by a LMP-enabled device for every control channel. lmpCcCounterDiscontinuityTime is used to indicate potential discontinuity for all counter objects in this table." INDEX { lmpCcId } ::= { lmpControlChannelPerfTable 1 } LmpControlChannelPerfEntry ::= SEQUENCE { lmpCcInOctets Counter32, lmpCcInDiscards Counter32, lmpCcInErrors Counter32, lmpCcOutOctets Counter32, lmpCcOutDiscards Counter32, lmpCcOutErrors Counter32, lmpCcConfigReceived Counter32, lmpCcConfigSent Counter32, lmpCcConfigRetransmit Counter32, lmpCcConfigAckReceived Counter32, lmpCcConfigAckSent Counter32, lmpCcConfigNackReceived Counter32, lmpCcConfigNackSent Counter32, lmpCcHelloReceived Counter32, lmpCcHelloSent Counter32, lmpCcBeginVerifyReceived Counter32, lmpCcBeginVerifySent Counter32, lmpCcBeginVerifyRetransmit Counter32, lmpCcBeginVerifyAckReceived Counter32, lmpCcBeginVerifyAckSent Counter32, lmpCcBeginVerifyNackReceived Counter32, lmpCcBeginVerifyNackSent Counter32, lmpCcEndVerifyReceived Counter32, lmpCcEndVerifySent Counter32, lmpCcEndVerifyRetransmit Counter32, lmpCcEndVerifyAckReceived Counter32, lmpCcEndVerifyAckSent Counter32, lmpCcTestStatusSuccessReceived Counter32, lmpCcTestStatusSuccessSent Counter32, lmpCcTestStatusSuccessRetransmit Counter32, lmpCcTestStatusFailureReceived Counter32, lmpCcTestStatusFailureSent Counter32, lmpCcTestStatusFailureRetransmit Counter32, lmpCcTestStatusAckReceived Counter32, lmpCcTestStatusAckSent Counter32, lmpCcLinkSummaryReceived Counter32, lmpCcLinkSummarySent Counter32, lmpCcLinkSummaryRetransmit Counter32, lmpCcLinkSummaryAckReceived Counter32, lmpCcLinkSummaryAckSent Counter32, lmpCcLinkSummaryNackReceived Counter32, lmpCcLinkSummaryNackSent Counter32, lmpCcChannelStatusReceived Counter32, lmpCcChannelStatusSent Counter32, lmpCcChannelStatusRetransmit Counter32, lmpCcChannelStatusAckReceived Counter32, lmpCcChannelStatusAckSent Counter32, lmpCcChannelStatusReqReceived Counter32, lmpCcChannelStatusReqSent Counter32, lmpCcChannelStatusReqRetransmit Counter32, lmpCcChannelStatusRspReceived Counter32, lmpCcChannelStatusRspSent Counter32, lmpCcCounterDiscontinuityTime TimeStamp } lmpCcInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LMP message octets received on the control channel." ::= { lmpControlChannelPerfEntry 1 } lmpCcInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that were chosen to be discarded even though no errors had been detected. One possible reason for discarding such a packet could be to free up buffer space." ::= { lmpControlChannelPerfEntry 2 } lmpCcInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being processed by LMP." ::= { lmpControlChannelPerfEntry 3 } lmpCcOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LMP message octets transmitted out of the control channel." ::= { lmpControlChannelPerfEntry 4 } lmpCcOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { lmpControlChannelPerfEntry 5 } lmpCcOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { lmpControlChannelPerfEntry 6 } lmpCcConfigReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Config messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 7 } lmpCcConfigSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Config messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 8 } lmpCcConfigRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Config messages that have been retransmitted over this control channel." ::= { lmpControlChannelPerfEntry 9 } lmpCcConfigAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ConfigAck messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 10 } lmpCcConfigAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ConfigAck messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 11 } lmpCcConfigNackReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ConfigNack messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 12 } lmpCcConfigNackSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ConfigNack messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 13 } lmpCcHelloReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Hello messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 14 } lmpCcHelloSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Hello messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 15 } lmpCcBeginVerifyReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerify messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 16 } lmpCcBeginVerifySent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerify messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 17 } lmpCcBeginVerifyRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerify messages that have been retransmitted over this control channel." ::= { lmpControlChannelPerfEntry 18 } lmpCcBeginVerifyAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyAck messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 19 } lmpCcBeginVerifyAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyAck messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 20 } lmpCcBeginVerifyNackReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyNack messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 21 } lmpCcBeginVerifyNackSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyNack messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 22 } lmpCcEndVerifyReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerify messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 23 } lmpCcEndVerifySent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerify messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 24 } lmpCcEndVerifyRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerify messages that have been retransmitted over this control channel." ::= { lmpControlChannelPerfEntry 25 } lmpCcEndVerifyAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerifyAck messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 26 } lmpCcEndVerifyAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerifyAck messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 27 } lmpCcTestStatusSuccessReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusSuccess messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 28 } lmpCcTestStatusSuccessSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusSuccess messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 29 } lmpCcTestStatusSuccessRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusSuccess messages that have been retransmitted over this control channel." ::= { lmpControlChannelPerfEntry 30 } lmpCcTestStatusFailureReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusFailure messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 31 } lmpCcTestStatusFailureSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusFailure messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 32 } lmpCcTestStatusFailureRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusFailure messages that have been retransmitted over this control channel." ::= { lmpControlChannelPerfEntry 33 } lmpCcTestStatusAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusAck messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 34 } lmpCcTestStatusAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusAck messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 35 } lmpCcLinkSummaryReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummary messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 36 } lmpCcLinkSummarySent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummary messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 37 } lmpCcLinkSummaryRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummary messages that have been retransmitted over this control channel." ::= { lmpControlChannelPerfEntry 38 } lmpCcLinkSummaryAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryAck messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 39 } lmpCcLinkSummaryAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryAck messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 40 } lmpCcLinkSummaryNackReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryNack messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 41 } lmpCcLinkSummaryNackSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryNack messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 42 } lmpCcChannelStatusReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 43 } lmpCcChannelStatusSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 44 } lmpCcChannelStatusRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been retransmitted on this control channel." ::= { lmpControlChannelPerfEntry 45 } lmpCcChannelStatusAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusAck messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 46 } lmpCcChannelStatusAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 47 } lmpCcChannelStatusReqReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusRequest messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 48 } lmpCcChannelStatusReqSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusRequest messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 49 } lmpCcChannelStatusReqRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusRequest messages that have been retransmitted on this control channel." ::= { lmpControlChannelPerfEntry 50 } lmpCcChannelStatusRspReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusResponse messages that have been received on this control channel." ::= { lmpControlChannelPerfEntry 51 } lmpCcChannelStatusRspSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusResponse messages that have been sent on this control channel." ::= { lmpControlChannelPerfEntry 52 } lmpCcCounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this control channel's counters suffered a discontinuity. The relevant counters are the specific instances associated with this control channel of any Counter32 object contained in the lmpControlChannelPerfTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { lmpControlChannelPerfEntry 53 } -- End of lmpControlChannelPerfTable -- LMP TE Link Table lmpTeLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpTeLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the LMP-specific TE link information. Overall TE link information is kept in three separate tables: ifTable for interface-specific information, lmpTeLinkTable for LMP specific information, and teLinkTable for generic TE link information. ifIndex is the common index to all tables." ::= { lmpObjects 12 } lmpTeLinkEntry OBJECT-TYPE SYNTAX LmpTeLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table exists for each ifEntry with an ifType of teLink(200) that is managed by LMP. An ifEntry with an ifIndex must exist before the corresponding lmpTeLinkEntry is created. If a TE link entry in the ifTable is destroyed, then so is the corresponding entry in the lmpTeLinkTable. The administrative status value is controlled from the ifEntry. Setting the administrative status to testing prompts LMP to start link verification on the TE link. Information about the TE link that is not LMP specific is contained in the teLinkTable of the TE-LINK-STD-MIB MIB module." INDEX { ifIndex } ::= { lmpTeLinkTable 1 } LmpTeLinkEntry ::= SEQUENCE { lmpTeLinkNbrRemoteNodeId LmpNodeId, lmpTeLinkVerification TruthValue, lmpTeLinkFaultManagement TruthValue, lmpTeLinkDwdm TruthValue, lmpTeLinkOperStatus INTEGER, lmpTeLinkRowStatus RowStatus, lmpTeLinkStorageType StorageType } lmpTeLinkNbrRemoteNodeId OBJECT-TYPE SYNTAX LmpNodeId MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Node ID of the TE link remote node. This value may be learned during the control channel parameter negotiation phase (in the Config message). Node ID is an address whose type must be IPv4." ::= { lmpTeLinkEntry 1 } lmpTeLinkVerification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the LMP link verification procedure is enabled for this TE link." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpTeLinkEntry 2 } lmpTeLinkFaultManagement OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the LMP fault management procedure is enabled on this TE link." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpTeLinkEntry 3 } lmpTeLinkDwdm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the LMP DWDM procedure is enabled on this TE link." REFERENCE "Link Management Protocol (LMP) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems, RFC 4209." ::= { lmpTeLinkEntry 4 } lmpTeLinkOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3), init(4), degraded(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual operational status of this TE link. The status is set to testing when the TE link is performing link verification. A degraded state indicates that there is no active control channel between the pair of nodes that form the endpoints of the TE link, but that at least one data-bearing link on the TE link is allocated." ::= { lmpTeLinkEntry 5 } lmpTeLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). All read-create objects must have valid and consistent values before the row can be activated." ::= { lmpTeLinkEntry 6 } lmpTeLinkStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the lmpTeLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row." DEFVAL { nonVolatile } ::= { lmpTeLinkEntry 7 } -- End of lmpTeLinkTable lmpGlobalLinkVerificationInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates how often the link verification procedure is executed. The interval is in milliseconds. A value of 0 is used to indicate that the link verification procedure should not be executed. The interval specified in this object should be large enough to allow the verification procedure to be completed before the start of the next interval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 13 } -- LMP Link Verification Table lmpLinkVerificationTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpLinkVerificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies TE link information associated with the LMP verification procedure." ::= { lmpObjects 14 } lmpLinkVerificationEntry OBJECT-TYPE SYNTAX LmpLinkVerificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LMP-enabled device for every TE link that supports the LMP verification procedure." INDEX { ifIndex } ::= { lmpLinkVerificationTable 1 } LmpLinkVerificationEntry ::= SEQUENCE { lmpLinkVerifyInterval LmpInterval, lmpLinkVerifyDeadInterval LmpInterval, lmpLinkVerifyTransportMechanism BITS, lmpLinkVerifyAllLinks TruthValue, lmpLinkVerifyTransmissionRate Unsigned32, lmpLinkVerifyWavelength Unsigned32, lmpLinkVerifyRowStatus RowStatus, lmpLinkVerifyStorageType StorageType } lmpLinkVerifyInterval OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the VerifyInterval parameter used in the LMP link verification process. It indicates the interval at which the Test messages are sent." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpLinkVerificationEntry 1 } lmpLinkVerifyDeadInterval OBJECT-TYPE SYNTAX LmpInterval MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the VerifyDeadInterval parameter used in the verification of the physical connectivity of data- bearing links. It specifies the observation period used to detect a Test message at the remote node." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpLinkVerificationEntry 2 } lmpLinkVerifyTransportMechanism OBJECT-TYPE SYNTAX BITS { -- All encoding types: payload(0), -- SONET/SDH encoding type: dccSectionOverheadBytes(1), dccLineOverheadBytes(2), j0Trace(3), j1Trace(4), j2Trace(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This defines the transport mechanism for the Test messages. The scope of this bit mask is restricted to each link encoding type. The local node will set the bits corresponding to the various mechanisms it can support for transmitting LMP Test messages. The receiver chooses the appropriate mechanism in the BeginVerifyAck message." REFERENCE "Link Management Protocol, RFC 4204 Synchronous Optical Network (SONET)/Synchronous Digital Hierarchy (SDH) Encoding for Link Management Protocol (LMP) Test Messages, RFC 4207." ::= { lmpLinkVerificationEntry 3 } lmpLinkVerifyAllLinks OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A value of true(1) for this object indicates that the verification process checks all unallocated links; otherwise, only the new ports or component links that have been added to this TE link are verified." ::= { lmpLinkVerificationEntry 4 } lmpLinkVerifyTransmissionRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes per second" MAX-ACCESS read-create STATUS current DESCRIPTION "This is the transmission rate of the data link over which the Test messages will be transmitted and is expressed in bytes per second." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpLinkVerificationEntry 5 } lmpLinkVerifyWavelength OBJECT-TYPE SYNTAX Unsigned32 UNITS "nanometers" MAX-ACCESS read-create STATUS current DESCRIPTION "This value corresponds to the wavelength at which the Test messages will be transmitted and is measured in nanometers (nm). If each data-bearing link corresponds to a separate wavelength, then this value should be set to 0." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpLinkVerificationEntry 6 } lmpLinkVerifyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). All read-create objects must have valid and consistent values before the row can be activated." ::= { lmpLinkVerificationEntry 7 } lmpLinkVerifyStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the lmpLinkVerificationTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row." DEFVAL { nonVolatile } ::= { lmpLinkVerificationEntry 8 } -- End of lmpLinkVerificationTable -- LMP TE Link Performance Table lmpTeLinkPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpTeLinkPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies LMP TE link performance counters." ::= { lmpObjects 15 } lmpTeLinkPerfEntry OBJECT-TYPE SYNTAX LmpTeLinkPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LMP-enabled device for every TE link. lmpTeCounterDiscontinuityTime is used to indicate potential discontinuity for all counter objects in this table." INDEX { ifIndex } ::= { lmpTeLinkPerfTable 1 } LmpTeLinkPerfEntry ::= SEQUENCE { lmpTeInOctets Counter32, lmpTeOutOctets Counter32, lmpTeBeginVerifyReceived Counter32, lmpTeBeginVerifySent Counter32, lmpTeBeginVerifyRetransmit Counter32, lmpTeBeginVerifyAckReceived Counter32, lmpTeBeginVerifyAckSent Counter32, lmpTeBeginVerifyNackReceived Counter32, lmpTeBeginVerifyNackSent Counter32, lmpTeEndVerifyReceived Counter32, lmpTeEndVerifySent Counter32, lmpTeEndVerifyRetransmit Counter32, lmpTeEndVerifyAckReceived Counter32, lmpTeEndVerifyAckSent Counter32, lmpTeTestStatusSuccessReceived Counter32, lmpTeTestStatusSuccessSent Counter32, lmpTeTestStatusSuccessRetransmit Counter32, lmpTeTestStatusFailureReceived Counter32, lmpTeTestStatusFailureSent Counter32, lmpTeTestStatusFailureRetransmit Counter32, lmpTeTestStatusAckReceived Counter32, lmpTeTestStatusAckSent Counter32, lmpTeLinkSummaryReceived Counter32, lmpTeLinkSummarySent Counter32, lmpTeLinkSummaryRetransmit Counter32, lmpTeLinkSummaryAckReceived Counter32, lmpTeLinkSummaryAckSent Counter32, lmpTeLinkSummaryNackReceived Counter32, lmpTeLinkSummaryNackSent Counter32, lmpTeChannelStatusReceived Counter32, lmpTeChannelStatusSent Counter32, lmpTeChannelStatusRetransmit Counter32, lmpTeChannelStatusAckReceived Counter32, lmpTeChannelStatusAckSent Counter32, lmpTeChannelStatusReqReceived Counter32, lmpTeChannelStatusReqSent Counter32, lmpTeChannelStatusReqRetransmit Counter32, lmpTeChannelStatusRspReceived Counter32, lmpTeChannelStatusRspSent Counter32, lmpTeCounterDiscontinuityTime TimeStamp } lmpTeInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LMP message octets received for this TE link." ::= { lmpTeLinkPerfEntry 1 } lmpTeOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LMP message octets transmitted out for this TE link." ::= { lmpTeLinkPerfEntry 2 } lmpTeBeginVerifyReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerify messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 3 } lmpTeBeginVerifySent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerify messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 4 } lmpTeBeginVerifyRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerify messages that have been retransmitted for this TE link." ::= { lmpTeLinkPerfEntry 5 } lmpTeBeginVerifyAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyAck messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 6 } lmpTeBeginVerifyAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyAck messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 7 } lmpTeBeginVerifyNackReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyNack messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 8 } lmpTeBeginVerifyNackSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of BeginVerifyNack messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 9 } lmpTeEndVerifyReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerify messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 10 } lmpTeEndVerifySent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerify messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 11 } lmpTeEndVerifyRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerify messages that have been retransmitted over this control channel." ::= { lmpTeLinkPerfEntry 12 } lmpTeEndVerifyAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerifyAck messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 13 } lmpTeEndVerifyAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of EndVerifyAck messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 14 } lmpTeTestStatusSuccessReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusSuccess messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 15 } lmpTeTestStatusSuccessSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusSuccess messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 16 } lmpTeTestStatusSuccessRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusSuccess messages that have been retransmitted for this TE link." ::= { lmpTeLinkPerfEntry 17 } lmpTeTestStatusFailureReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusFailure messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 18 } lmpTeTestStatusFailureSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusFailure messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 19 } lmpTeTestStatusFailureRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusFailure messages that have been retransmitted on this TE link." ::= { lmpTeLinkPerfEntry 20 } lmpTeTestStatusAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusAck messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 21 } lmpTeTestStatusAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of TestStatusAck messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 22 } lmpTeLinkSummaryReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummary messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 23 } lmpTeLinkSummarySent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummary messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 24 } lmpTeLinkSummaryRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummary messages that have been retransmitted over this control channel." ::= { lmpTeLinkPerfEntry 25 } lmpTeLinkSummaryAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryAck messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 26 } lmpTeLinkSummaryAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryAck messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 27 } lmpTeLinkSummaryNackReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryNack messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 28 } lmpTeLinkSummaryNackSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of LinkSummaryNack messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 29 } lmpTeChannelStatusReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 30 } lmpTeChannelStatusSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 31 } lmpTeChannelStatusRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been retransmitted for this TE link." ::= { lmpTeLinkPerfEntry 32 } lmpTeChannelStatusAckReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusAck messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 33 } lmpTeChannelStatusAckSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatus messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 34 } lmpTeChannelStatusReqReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusRequest messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 35 } lmpTeChannelStatusReqSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusRequest messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 36 } lmpTeChannelStatusReqRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusRequest messages that have been retransmitted for this TE link." ::= { lmpTeLinkPerfEntry 37 } lmpTeChannelStatusRspReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusResponse messages that have been received for this TE link." ::= { lmpTeLinkPerfEntry 38 } lmpTeChannelStatusRspSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of ChannelStatusResponse messages that have been sent for this TE link." ::= { lmpTeLinkPerfEntry 39 } lmpTeCounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this TE link's counters suffered a discontinuity. The relevant counters are the specific instances associated with this TE link of any Counter32 object contained in the lmpTeLinkPerfTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { lmpTeLinkPerfEntry 40 } -- End of lmpTeLinkPerfTable -- LMP Data Link Table lmpDataLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpDataLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the data-bearing links managed by the LMP." ::= { lmpObjects 16 } lmpDataLinkEntry OBJECT-TYPE SYNTAX LmpDataLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table exists for each ifEntry that represents a data-bearing link. An ifEntry with an ifIndex must exist before the corresponding lmpDataLinkEntry is created. If an entry representing the data-bearing link is destroyed in the ifTable, then so is the corresponding entry in the lmpDataLinkTable. The administrative status value is controlled from the ifEntry. The index to this table is also used to get information in the componentLinkTable of the TE-LINK-STD-MIB MIB module." INDEX { ifIndex } ::= { lmpDataLinkTable 1 } LmpDataLinkEntry ::= SEQUENCE { lmpDataLinkType INTEGER, lmpDataLinkAddressType InetAddressType, lmpDataLinkIpAddr InetAddress, lmpDataLinkRemoteIpAddress InetAddress, lmpDataLinkRemoteIfId InterfaceIndexOrZero, lmpDataLinkEncodingType TeLinkEncodingType, lmpDataLinkActiveOperStatus INTEGER, lmpDataLinkPassiveOperStatus INTEGER, lmpDataLinkRowStatus RowStatus, lmpDataLinkStorageType StorageType } lmpDataLinkType OBJECT-TYPE SYNTAX INTEGER { port(1), componentLink(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute specifies whether this data-bearing link is a port or a component link. Component links are multiplex capable, whereas ports are not multiplex capable." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpDataLinkEntry 1 } lmpDataLinkAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute specifies the data-bearing link IP address type. If the data-bearing link is unnumbered, the address type must be set to unknown(0)." ::= { lmpDataLinkEntry 2 } lmpDataLinkIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The local Internet address for numbered links. The type of this address is determined by the value of lmpDataLinkAddressType object. For IPv4 and IPv6 numbered links, this object represents the local IP address associated with the data-bearing link. For an unnumbered link, the local address is of type unknown, and this object is set to the zero-length string; the ifIndex object then identifies the unnumbered address." ::= { lmpDataLinkEntry 3 } lmpDataLinkRemoteIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The remote Internet address for numbered data-bearing links. The type of this address is determined by the lmpDataLinkAddressType object. For IPv4 and IPv6 numbered links, this object represents the remote IP address associated with the data-bearing link. For an unnumbered link, the remote address is of type unknown, and this object is set to the zero-length string; the lmpDataLinkRemoteIfId object then identifies the unnumbered address. This information is either configured manually or communicated by the remote node during the link verification procedure." ::= { lmpDataLinkEntry 4 } lmpDataLinkRemoteIfId OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "Interface identifier of the remote end point. This information is either configured manually or communicated by the remote node during the link verification procedure." ::= { lmpDataLinkEntry 5 } lmpDataLinkEncodingType OBJECT-TYPE SYNTAX TeLinkEncodingType MAX-ACCESS read-create STATUS current DESCRIPTION "The encoding type of the data-bearing link." REFERENCE "Generalized MPLS Signaling Functional Description, RFC 3471." ::= { lmpDataLinkEntry 6 } lmpDataLinkActiveOperStatus OBJECT-TYPE SYNTAX INTEGER { upAlloc(1), upFree(2), down(3), testing(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual operational status of this data-bearing link (active FSM)." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpDataLinkEntry 7 } lmpDataLinkPassiveOperStatus OBJECT-TYPE SYNTAX INTEGER { upAlloc(1), upFree(2), down(3), psvTst(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual operational status of this data-bearing link (passive FSM)." REFERENCE "Link Management Protocol, RFC 4204." ::= { lmpDataLinkEntry 8 } lmpDataLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if the status is active(1). All read-create objects must have valid and consistent values before the row can be activated." ::= { lmpDataLinkEntry 9 } lmpDataLinkStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the lmpDataLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row." DEFVAL { nonVolatile } ::= { lmpDataLinkEntry 10 } -- End of lmpDataLinkTable -- LMP Data Link Performance Table lmpDataLinkPerfTable OBJECT-TYPE SYNTAX SEQUENCE OF LmpDataLinkPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the data-bearing links LMP performance counters." ::= { lmpObjects 17 } lmpDataLinkPerfEntry OBJECT-TYPE SYNTAX LmpDataLinkPerfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table contains information about the LMP performance counters for the data-bearing links. lmpDataLinkDiscontinuityTime is used to indicate potential discontinuity for all counter objects in this table." INDEX { ifIndex } ::= { lmpDataLinkPerfTable 1 } LmpDataLinkPerfEntry ::= SEQUENCE { lmpDataLinkTestReceived Counter32, lmpDataLinkTestSent Counter32, lmpDataLinkActiveTestSuccess Counter32, lmpDataLinkActiveTestFailure Counter32, lmpDataLinkPassiveTestSuccess Counter32, lmpDataLinkPassiveTestFailure Counter32, lmpDataLinkDiscontinuityTime TimeStamp } lmpDataLinkTestReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Test messages that have been received on this data-bearing link." ::= { lmpDataLinkPerfEntry 1 } lmpDataLinkTestSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of Test messages that have been sent on this data-bearing link." ::= { lmpDataLinkPerfEntry 2 } lmpDataLinkActiveTestSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of data-bearing link tests that were successful on the active side of this data- bearing link." ::= { lmpDataLinkPerfEntry 3 } lmpDataLinkActiveTestFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of data-bearing link tests that failed on the active side of this data-bearing link." ::= { lmpDataLinkPerfEntry 4 } lmpDataLinkPassiveTestSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of data-bearing link tests that were successful on the passive side of this data- bearing link." ::= { lmpDataLinkPerfEntry 5 } lmpDataLinkPassiveTestFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the number of data-bearing link tests that failed on the passive side of this data-bearing link." ::= { lmpDataLinkPerfEntry 6 } lmpDataLinkDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one or more of this data-bearing link's counters suffered a discontinuity. The relevant counters are the specific instances associated with this data-bearing link of any Counter32 object contained in the lmpDataLinkPerfTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { lmpDataLinkPerfEntry 7 } -- End of lmpDataLinkPerfTable -- Notification Configuration lmpNotificationMaxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The LMP notification rate depends on the size of the network, the type of links, the network configuration, the reliability of the network, etc. When this MIB was designed, care was taken to minimize the amount of notifications generated for LMP purposes. Wherever possible, notifications are state driven, meaning that the notifications are sent only when the system changes state. The only notifications that are repeated and that could cause a problem as far as congestion is concerned are the ones associated with data link verification. Without any considerations to handling of these notifications, a problem may arise if the number of data links is high. Since the data link verification notifications can happen only once per data link per link verification interval, the notification rate should be sustainable if one chooses an appropriate link verification interval for a given network configuration. For instance, a network of 100 nodes with 5 links of 128 wavelengths each and a link verification of 1 minute, where no more than 10% of the links failed at any given time, would have 1 notification per second sent from each node, or 100 notifications per second for the whole network. The rest of the notifications are negligible compared to this number. To alleviate the congestion problem, the lmpNotificationMaxRate object can be used to implement a throttling mechanism. It is also possible to enable/disable certain type of notifications. This variable indicates the maximum number of notifications issued per minute. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period or may queue them until an appropriate time. A value of 0 means that no throttling is applied and events may be notified at the rate at which they occur. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 18 } lmpLinkPropertyNotificationsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true(1), then it enables the generation of lmpTeLinkPropertyMismatch and lmpDataLinkPropertyMismatch notifications; otherwise, these notifications are not emitted. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." DEFVAL { false } ::= { lmpObjects 19 } lmpUnprotectedNotificationsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true(1), then it enables the generation of lmpUnprotected notifications; otherwise, these notifications are not emitted. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." DEFVAL { false } ::= { lmpObjects 20 } lmpCcUpDownNotificationsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true(1), then it enables the generation of lmpControlChannelUp and lmpControlChannelDown notifications; otherwise, these notifications are not emitted. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." DEFVAL { false } ::= { lmpObjects 21 } lmpTeLinkNotificationsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true(1), then it enables the generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded notifications; otherwise, these notifications are not emitted. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." DEFVAL { false } ::= { lmpObjects 22 } lmpDataLinkNotificationsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this object is true(1), then it enables the generation of lmpDataLinkVerificationFailure notification; otherwise, these notifications are not emitted. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." DEFVAL { false } ::= { lmpObjects 23 } -- Notifications -- Link Property Mismatch Notifications lmpTeLinkPropertyMismatch NOTIFICATION-TYPE OBJECTS { teLinkRemoteIpAddr, teLinkIncomingIfId } STATUS current DESCRIPTION "This notification is generated when a TE link property mismatch is detected on the node. The received remote TE link ID of the misconfigured TE link is represented by either teLinkRemoteIpAddr or teLinkIncomingIfId, depending on whether the TE link is numbered or unnumbered. This notification should not be sent unless lmpLinkPropertyNotificationsEnabled is true(1). It is recommended that this notification be reported only the first time a mismatch is detected. Otherwise, for a given TE link, this notification can occur no more than once per verification interval (lmpGlobalLinkVerificationInterval)." ::= { lmpNotifications 1 } lmpDataLinkPropertyMismatch NOTIFICATION-TYPE OBJECTS { lmpDataLinkType, lmpDataLinkRemoteIfId } STATUS current DESCRIPTION "This notification is generated when a data-bearing link property mismatch is detected on the node. lmpDataLinkType is used to identify the local identifiers associated with the data link. (The data link interface index can be used to determine the TE link interface index, as this relationship is captured in the interface stack table.) The remote entity interface ID is the remote entity interface ID received in the LinkSummary message. This notification should not be sent unless lmpLinkPropertyNotificationsEnabled is true(1). It is recommended that this notification be reported only the first time a mismatch is detected. Otherwise, for a given data link, this notification can occur no more than once per verification interval (lmpGlobalLinkVerificationInterval)." ::= { lmpNotifications 2 } -- Neighbor Notification lmpUnprotected NOTIFICATION-TYPE OBJECTS { lmpCcNbrNodeId } STATUS current DESCRIPTION "This notification is generated when there is more than one control channel between LMP neighbors and the last redundant control channel has failed. If the remaining operational control channel fails, then there will be no more control channels between the pair of nodes and all the TE links between the pair of nodes, will go to degraded state. This notification should not be sent unless lmpUnprotectedNotificationsEnabled is set to true(1)." ::= { lmpNotifications 3 } -- Control Channel Notifications lmpControlChannelUp NOTIFICATION-TYPE OBJECTS { lmpCcAdminStatus, lmpCcOperStatus } STATUS current DESCRIPTION "This notification is generated when a control channel transitions to the up operational state. This notification should not be sent unless lmpCcUpDownNotificationsEnabled is true(1)." ::= { lmpNotifications 4 } lmpControlChannelDown NOTIFICATION-TYPE OBJECTS { lmpCcAdminStatus, lmpCcOperStatus } STATUS current DESCRIPTION "This notification is generated when a control channel transitions out of the up operational state. This notification should not be sent unless lmpCcUpDownNotificationsEnabled is true(1)." ::= { lmpNotifications 5 } -- TE Link Notification lmpTeLinkDegraded NOTIFICATION-TYPE OBJECTS { lmpTeLinkOperStatus } STATUS current DESCRIPTION "This notification is generated when a lmpTeLinkOperStatus object for a TE link enters the degraded state. This notification should not be sent unless lmpTeLinkNotificationsEnabled is true(1)." ::= { lmpNotifications 6 } lmpTeLinkNotDegraded NOTIFICATION-TYPE OBJECTS { lmpTeLinkOperStatus } STATUS current DESCRIPTION "This notification is generated when a lmpTeLinkOperStatus object for a TE link leaves the degraded state. This notification should not be sent unless lmpTeLinkNotificationsEnabled is true(1)." ::= { lmpNotifications 7 } -- Data-bearing Link Notification lmpDataLinkVerificationFailure NOTIFICATION-TYPE OBJECTS { lmpDataLinkActiveOperStatus, lmpDataLinkPassiveOperStatus } STATUS current DESCRIPTION "This notification is generated when a data-bearing link verification fails. This notification should not be sent unless lmpDataLinkNotificationsEnabled is true(1). For a given data link, this notification can occur no more than once per verification interval (lmpGlobalLinkVerificationInterval)." ::= { lmpNotifications 8 } -- End of notifications -- Module compliance lmpCompliances OBJECT IDENTIFIER ::= { lmpConformance 1 } lmpGroups OBJECT IDENTIFIER ::= { lmpConformance 2 } lmpModuleFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that support the configuration and monitoring of LMP MIB." MODULE -- this module MANDATORY-GROUPS { lmpNodeGroup, lmpControlChannelGroup, lmpLinkPropertyCorrelationGroup, lmpPerfGroup, lmpTeLinkGroup, lmpDataLinkGroup } GROUP lmpCcIsNotInterfaceGroup DESCRIPTION "This group is mandatory for devices that support control channels that are not interfaces, in addition to lmpControlChannelGroup. The following constraint applies: lmpCcIsIf must at least be read-only, returning false(2)." GROUP lmpCcIsInterfaceGroup DESCRIPTION "This group is mandatory for devices that support control channels that are interfaces, in addition to lmpControlChannelGroup. The following constraint applies: lmpCcIsIf must at least be read-only, returning true(1)." GROUP lmpLinkVerificationGroup DESCRIPTION "This group is mandatory for devices that support the link verification procedure." GROUP lmpNotificationGroup DESCRIPTION "This group is optional." -- lmpNbrTable OBJECT lmpNbrRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { active(1), notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for notReady(3) and createAndWait(5) is not required." -- lmpControlChannelTable OBJECT lmpCcRemoteAddressType SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) } DESCRIPTION "Only ipv4(1) and ipv6(2) address types need to be supported for non-point-to-point configurations." OBJECT lmpCcRemoteIpAddr SYNTAX InetAddress (SIZE(0|4|16)) DESCRIPTION "The size of the IP address depends on the address type." OBJECT lmpCcRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { active(1), notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for notReady(3) and createAndWait(5) is not required." OBJECT lmpCcOperStatus SYNTAX INTEGER { up(1), down(2) } DESCRIPTION "A value of configSnd(3), configRcv(4), active(5), or goingDown(6) need not be supported." -- lmpTeLinkTable OBJECT lmpTeLinkOperStatus SYNTAX INTEGER { up(1), down(2), degraded(5) } DESCRIPTION "The testing(3) and init(4) state need not be supported." OBJECT lmpTeLinkRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { active(1), notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for notReady(3) and createAndWait(5) is not required." -- lmpDataLinkTable OBJECT lmpDataLinkActiveOperStatus SYNTAX INTEGER { upAlloc(1), upFree(2), down(3) } DESCRIPTION "A value of testing(4) need not be supported." OBJECT lmpDataLinkPassiveOperStatus SYNTAX INTEGER { upAlloc(1), upFree(2), down(3) } DESCRIPTION "A value of psvTst(4) need not be supported." OBJECT lmpDataLinkRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { active(1), notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for notReady(3) and createAndWait(5) is not required." ::= { lmpCompliances 1 } lmpModuleReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that support the monitoring of the LMP MIB." MODULE -- this module -- The mandatory groups have to be implemented -- by all LMP-enabled devices. However, they may all be supported -- as read-only objects in the case where manual -- configuration is not supported. MANDATORY-GROUPS { lmpNodeGroup, lmpControlChannelGroup, lmpLinkPropertyCorrelationGroup, lmpPerfGroup, lmpTeLinkGroup, lmpDataLinkGroup } GROUP lmpCcIsNotInterfaceGroup DESCRIPTION "This group is mandatory for devices that support control channels that are not interfaces, in addition to lmpControlChannelGroup. The following constraint applies: lmpCcIsIf must at least be read-only, returning false(2)." GROUP lmpCcIsInterfaceGroup DESCRIPTION "This group is mandatory for devices that support control channels that are interfaces, in addition to lmpControlChannelGroup. The following constraint applies: lmpCcIsIf must at least be read-only, returning true(1)." GROUP lmpLinkVerificationGroup DESCRIPTION "This group is mandatory for devices that support the link verification procedure." GROUP lmpNotificationGroup DESCRIPTION "This group is optional." -- Scalars OBJECT lmpAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpGlobalLinkVerificationInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloIntervalDefault MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloIntervalDefaultMin MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloIntervalDefaultMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloDeadIntervalDefault MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloDeadIntervalDefaultMin MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloDeadIntervalDefaultMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpNotificationMaxRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- lmpNbrTable OBJECT lmpNbrRetransmitInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpNbrRetryLimit MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpNbrRetransmitDelta MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpNbrRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active(1) is the only status that needs to be supported." OBJECT lmpNbrStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- lmpControlChannelTable OBJECT lmpCcUnderlyingIfIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcIsIf MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcNbrNodeId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcRemoteAddressType SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Only ipv4(1) and ipv6(2) address types need to be supported for non-point-to-point configurations." OBJECT lmpCcRemoteIpAddr SYNTAX InetAddress (SIZE(0|4|16)) MIN-ACCESS read-only DESCRIPTION "The size of the IP address depends on the address type." OBJECT lmpCcSetupRole MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcAuthentication MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloIntervalMin MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloIntervalMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloDeadIntervalMin MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcHelloDeadIntervalMax MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpCcRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active(1) is the only status that needs to be supported." OBJECT lmpCcOperStatus SYNTAX INTEGER { up(1), down(2) } DESCRIPTION "A value of configSnd(3), configRcv(4), active(5), or goingDown(6) need not be supported." OBJECT lmpCcStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- lmpLinkVerificationTable OBJECT lmpLinkVerifyInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpLinkVerifyDeadInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpLinkVerifyAllLinks MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- lmpTeLinkTable OBJECT lmpTeLinkNbrRemoteNodeId MIN-ACCESS read-only DESCRIPTION "Write access is not required if the link verification procedure is enabled." OBJECT lmpTeLinkVerification MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpTeLinkFaultManagement MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpTeLinkDwdm MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpTeLinkOperStatus SYNTAX INTEGER { up(1), down(2), degraded(5) } DESCRIPTION "The testing(3) and init(4) state need not be supported." OBJECT lmpTeLinkRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active(1) is the only status that needs to be supported." OBJECT lmpTeLinkStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- lmpTeLinkVerificationTable OBJECT lmpLinkVerifyTransmissionRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpLinkVerifyWavelength MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpLinkVerifyRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active(1) is the only status that needs to be supported." OBJECT lmpLinkVerifyStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." -- lmpDataLinkTable OBJECT lmpDataLinkAddressType SYNTAX INTEGER { unknown(0), ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Only ipv4(1) and ipv6(2) address types need to be supported for numbered links. For unnumbered links, the unknown(0) address type needs to be supported." OBJECT lmpDataLinkIpAddr SYNTAX InetAddress (SIZE(0|4|16)) MIN-ACCESS read-only DESCRIPTION "The size of the data-bearing link IP address depends on the type of data-bearing link. Data-bearing link IP address size is zero if the link is unnumbered, four if the link IP address is IPv4, and sixteen if the link IP address is IPv6." OBJECT lmpDataLinkRemoteIpAddress SYNTAX InetAddress (SIZE(0|4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required if the link verification procedure is enabled." OBJECT lmpDataLinkRemoteIfId MIN-ACCESS read-only DESCRIPTION "Write access is not required if the link verification procedure is enabled." OBJECT lmpDataLinkEncodingType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT lmpDataLinkActiveOperStatus SYNTAX INTEGER { upAlloc(1), upFree(2), down(3) } DESCRIPTION "A value of testing(4) need not be supported." OBJECT lmpDataLinkPassiveOperStatus SYNTAX INTEGER { upAlloc(1), upFree(2), down(3) } DESCRIPTION "A value of psvTst(4) need not be supported." OBJECT lmpDataLinkRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active(1) is the only status that needs to be supported." OBJECT lmpDataLinkStorageType MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { lmpCompliances 2 } -- Units of conformance lmpNodeGroup OBJECT-GROUP OBJECTS { lmpAdminStatus, lmpOperStatus, lmpNbrAdminStatus, lmpNbrOperStatus, lmpNbrRowStatus, lmpNbrStorageType, lmpUnprotectedNotificationsEnabled, lmpNotificationMaxRate } STATUS current DESCRIPTION "Collection of objects that represent LMP node configuration." ::= { lmpGroups 1 } lmpControlChannelGroup OBJECT-GROUP OBJECTS { lmpNbrRetransmitInterval, lmpNbrRetryLimit, lmpNbrRetransmitDelta, lmpNbrAdminStatus, lmpNbrOperStatus, lmpNbrRowStatus, lmpNbrStorageType, lmpCcHelloIntervalDefault, lmpCcHelloIntervalDefaultMin, lmpCcHelloIntervalDefaultMax, lmpCcHelloDeadIntervalDefault, lmpCcHelloDeadIntervalDefaultMin, lmpCcHelloDeadIntervalDefaultMax, lmpCcNbrNodeId, lmpCcRemoteId, lmpCcRemoteAddressType, lmpCcRemoteIpAddr, lmpCcSetupRole, lmpCcAuthentication, lmpCcHelloInterval, lmpCcHelloIntervalMin, lmpCcHelloIntervalMax, lmpCcHelloIntervalNegotiated, lmpCcHelloDeadInterval, lmpCcHelloDeadIntervalMin, lmpCcHelloDeadIntervalMax, lmpCcHelloDeadIntervalNegotiated, lmpCcOperStatus, lmpCcRowStatus, lmpCcStorageType, lmpCcUpDownNotificationsEnabled } STATUS current DESCRIPTION "Objects that can be used to configure LMP interface." ::= { lmpGroups 2 } lmpCcIsInterfaceGroup OBJECT-GROUP OBJECTS { lmpCcIsIf } STATUS current DESCRIPTION "Objects that can be used to configure control channels that are interfaces." ::= { lmpGroups 3 } lmpCcIsNotInterfaceGroup OBJECT-GROUP OBJECTS { lmpCcUnderlyingIfIndex, lmpCcIsIf, lmpCcLastChange, lmpCcAdminStatus } STATUS current DESCRIPTION "Objects that can be used to configure control channels that are not interfaces." ::= { lmpGroups 4 } lmpLinkPropertyCorrelationGroup OBJECT-GROUP OBJECTS { lmpLinkPropertyNotificationsEnabled } STATUS current DESCRIPTION "Collection of objects used to configure the link property correlation procedure." ::= { lmpGroups 5 } lmpLinkVerificationGroup OBJECT-GROUP OBJECTS { lmpGlobalLinkVerificationInterval, lmpLinkVerifyInterval, lmpLinkVerifyDeadInterval, lmpLinkVerifyTransportMechanism, lmpLinkVerifyAllLinks, lmpLinkVerifyTransmissionRate, lmpLinkVerifyWavelength, lmpLinkVerifyRowStatus, lmpLinkVerifyStorageType, lmpDataLinkNotificationsEnabled } STATUS current DESCRIPTION "Collection of objects that represent the link verification procedure configuration." ::= { lmpGroups 6 } lmpPerfGroup OBJECT-GROUP OBJECTS { lmpCcInOctets, lmpCcInDiscards, lmpCcInErrors, lmpCcOutOctets, lmpCcOutDiscards, lmpCcOutErrors, lmpCcConfigReceived, lmpCcConfigSent, lmpCcConfigRetransmit, lmpCcConfigAckReceived, lmpCcConfigAckSent, lmpCcConfigNackSent, lmpCcConfigNackReceived, lmpCcHelloReceived, lmpCcHelloSent, lmpCcBeginVerifyReceived, lmpCcBeginVerifySent, lmpCcBeginVerifyRetransmit, lmpCcBeginVerifyAckReceived, lmpCcBeginVerifyAckSent, lmpCcBeginVerifyNackReceived, lmpCcBeginVerifyNackSent, lmpCcEndVerifyReceived, lmpCcEndVerifySent, lmpCcEndVerifyRetransmit, lmpCcEndVerifyAckReceived, lmpCcEndVerifyAckSent, lmpCcTestStatusSuccessReceived, lmpCcTestStatusSuccessSent, lmpCcTestStatusSuccessRetransmit, lmpCcTestStatusFailureReceived, lmpCcTestStatusFailureSent, lmpCcTestStatusFailureRetransmit, lmpCcTestStatusAckReceived, lmpCcTestStatusAckSent, lmpCcLinkSummaryReceived, lmpCcLinkSummarySent, lmpCcLinkSummaryRetransmit, lmpCcLinkSummaryAckReceived, lmpCcLinkSummaryAckSent, lmpCcLinkSummaryNackReceived, lmpCcLinkSummaryNackSent, lmpCcChannelStatusReceived, lmpCcChannelStatusSent, lmpCcChannelStatusRetransmit, lmpCcChannelStatusAckReceived, lmpCcChannelStatusAckSent, lmpCcChannelStatusReqReceived, lmpCcChannelStatusReqSent, lmpCcChannelStatusReqRetransmit, lmpCcChannelStatusRspReceived, lmpCcChannelStatusRspSent, lmpCcCounterDiscontinuityTime, lmpTeInOctets, lmpTeOutOctets, lmpTeBeginVerifyReceived, lmpTeBeginVerifySent, lmpTeBeginVerifyRetransmit, lmpTeBeginVerifyAckReceived, lmpTeBeginVerifyAckSent, lmpTeBeginVerifyNackReceived, lmpTeBeginVerifyNackSent, lmpTeEndVerifyReceived, lmpTeEndVerifySent, lmpTeEndVerifyRetransmit, lmpTeEndVerifyAckReceived, lmpTeEndVerifyAckSent, lmpTeTestStatusSuccessReceived, lmpTeTestStatusSuccessSent, lmpTeTestStatusSuccessRetransmit, lmpTeTestStatusFailureReceived, lmpTeTestStatusFailureSent, lmpTeTestStatusFailureRetransmit, lmpTeTestStatusAckReceived, lmpTeTestStatusAckSent, lmpTeLinkSummaryReceived, lmpTeLinkSummarySent, lmpTeLinkSummaryRetransmit, lmpTeLinkSummaryAckReceived, lmpTeLinkSummaryAckSent, lmpTeLinkSummaryNackReceived, lmpTeLinkSummaryNackSent, lmpTeChannelStatusReceived, lmpTeChannelStatusSent, lmpTeChannelStatusRetransmit, lmpTeChannelStatusAckReceived, lmpTeChannelStatusAckSent, lmpTeChannelStatusReqReceived, lmpTeChannelStatusReqSent, lmpTeChannelStatusReqRetransmit, lmpTeChannelStatusRspSent, lmpTeChannelStatusRspReceived, lmpTeCounterDiscontinuityTime, lmpDataLinkTestReceived, lmpDataLinkTestSent, lmpDataLinkActiveTestSuccess, lmpDataLinkActiveTestFailure, lmpDataLinkPassiveTestSuccess, lmpDataLinkPassiveTestFailure, lmpDataLinkDiscontinuityTime } STATUS current DESCRIPTION "Collection of objects used to provide performance information about LMP interfaces and data-bearing links." ::= { lmpGroups 7 } lmpTeLinkGroup OBJECT-GROUP OBJECTS { lmpTeLinkNbrRemoteNodeId, lmpTeLinkVerification, lmpTeLinkFaultManagement, lmpTeLinkDwdm, lmpTeLinkOperStatus, lmpTeLinkRowStatus, lmpTeLinkStorageType, lmpTeLinkNotificationsEnabled } STATUS current DESCRIPTION "Objects that can be used to configure TE links." ::= { lmpGroups 8 } lmpDataLinkGroup OBJECT-GROUP OBJECTS { lmpDataLinkType, lmpDataLinkAddressType, lmpDataLinkIpAddr, lmpDataLinkRemoteIpAddress, lmpDataLinkRemoteIfId, lmpDataLinkEncodingType, lmpDataLinkActiveOperStatus, lmpDataLinkPassiveOperStatus, lmpDataLinkRowStatus, lmpDataLinkStorageType } STATUS current DESCRIPTION "Collection of objects that represent data-bearing link configuration." ::= { lmpGroups 9 } lmpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { lmpTeLinkPropertyMismatch, lmpDataLinkPropertyMismatch, lmpUnprotected, lmpControlChannelUp, lmpControlChannelDown, lmpTeLinkDegraded, lmpTeLinkNotDegraded, lmpDataLinkVerificationFailure } STATUS current DESCRIPTION "Set of notifications defined in this module." ::= { lmpGroups 10 } -- End of LMP-MIB END