SYSAPPL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks, Counter32, Gauge32 FROM SNMPv2-SMI DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF mib-2 FROM SNMPv2-SMI; -- System Application MIB sysApplMIB MODULE-IDENTITY LAST-UPDATED "9710200000Z" ORGANIZATION "IETF Applications MIB Working Group" CONTACT-INFO "Cheryl Krupczak (Editor, WG Advisor) Postal: Empire Technologies, Inc. 541 Tenth Street NW Suite 169 Atlanta, GA 30318 USA Phone: (770) 384-0184 Email: [email protected] Jon Saperia (WG Chair) Postal: BGS Systems, Inc. One First Avenue Waltham, MA 02254-9111 USA Phone: (617) 891-0000 Email: [email protected]" DESCRIPTION "The MIB module defines management objects that model applications as collections of executables and files installed and executing on a host system. The MIB presents a system-level view of applications; i.e., objects in this MIB are limited to those attributes that can typically be obtained from the system itself without adding special instrumentation to the applications." ::= { mib-2 54 } sysApplOBJ OBJECT IDENTIFIER ::= { sysApplMIB 1 } sysApplInstalled OBJECT IDENTIFIER ::= { sysApplOBJ 1 } sysApplRun OBJECT IDENTIFIER ::= { sysApplOBJ 2 } sysApplMap OBJECT IDENTIFIER ::= { sysApplOBJ 3 } sysApplNotifications OBJECT IDENTIFIER ::= { sysApplMIB 2 } sysApplConformance OBJECT IDENTIFIER ::= { sysApplMIB 3 } -- Textual Conventions RunState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the current execution state of a running application or process. The possible values are: running(1), runnable(2), - waiting for a resource (CPU, etc.) waiting(3), - waiting for an event exiting(4), other(5) - other invalid state" SYNTAX INTEGER { running (1), runnable (2), -- waiting for resource (CPU, etc.) waiting (3), -- waiting for event exiting (4), other (5) -- other invalid state } LongUtf8String ::= TEXTUAL-CONVENTION DISPLAY-HINT "1024a" STATUS current DESCRIPTION "To facilitate internationalization, this TC represents information taken from the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 character encoding scheme described in RFC 2044 [10]. For strings in 7-bit US-ASCII, there is no impact since the UTF-8 representation is identical to the US-ASCII encoding." SYNTAX OCTET STRING (SIZE (0..1024)) Utf8String ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "To facilitate internationalization, this TC represents information taken from the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 character encoding scheme described in RFC 2044 [10]. For strings in 7-bit US-ASCII, there is no impact since the UTF-8 representation is identical to the US-ASCII encoding." SYNTAX OCTET STRING (SIZE (0..255)) -- sysApplInstalled Group -- This group provides information about application packages -- that have been installed on the host computer. The group -- contains two tables. The first, the sysApplInstallPkgTable, -- describes the application packages, the second, the -- sysApplInstallElmtTable, describes the constituent elements -- (files and executables) which compose an application package. -- -- In order to appear in this group, an application and its -- component files must be discoverable by the system itself, -- possibly through some type of software installation mechanism -- or registry. -- sysApplInstallPkgTable -- The system installed application packages table provides -- information on the software packages installed on a system. -- These packages may consist of many different files including -- executable and non-executable files. sysApplInstallPkgTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplInstallPkgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the software application packages installed on a host computer. In order to appear in this table, it may be necessary for the application to be installed using some type of software installation mechanism or global registry so that its existence can be detected by the agent implementation." ::= { sysApplInstalled 1 } sysApplInstallPkgEntry OBJECT-TYPE SYNTAX SysApplInstallPkgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logical row describing an installed application package." INDEX { sysApplInstallPkgIndex } ::= { sysApplInstallPkgTable 1 } SysApplInstallPkgEntry ::= SEQUENCE { sysApplInstallPkgIndex Unsigned32, sysApplInstallPkgManufacturer Utf8String, sysApplInstallPkgProductName Utf8String, sysApplInstallPkgVersion Utf8String, sysApplInstallPkgSerialNumber Utf8String, sysApplInstallPkgDate DateAndTime, sysApplInstallPkgLocation LongUtf8String } sysApplInstallPkgIndex OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer used only for indexing purposes. Generally monotonically increasing from 1 as new applications are installed. The value for each installed application must remain constant at least from one re-initialization of the network management entity which implements this MIB module to the next re-initialization. The specific value is meaningful only within a given SNMP entity. A sysApplInstallPkgIndex value must not be re-used until the next agent entity restart in the event the installed application entry is deleted." ::= { sysApplInstallPkgEntry 1 } sysApplInstallPkgManufacturer OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The Manufacturer of the software application package." ::= { sysApplInstallPkgEntry 2 } sysApplInstallPkgProductName OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The name assigned to the software application package by the Manufacturer." ::= { sysApplInstallPkgEntry 3 } sysApplInstallPkgVersion OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The version number assigned to the application package by the manufacturer of the software." ::= { sysApplInstallPkgEntry 4 } sysApplInstallPkgSerialNumber OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the software assigned by the manufacturer." ::= { sysApplInstallPkgEntry 5 } sysApplInstallPkgDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time this software application was installed on the host." ::= { sysApplInstallPkgEntry 6 } sysApplInstallPkgLocation OBJECT-TYPE SYNTAX LongUtf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The complete path name where the application package is installed. For example, the value would be '/opt/MyapplDir' if the application package was installed in the /opt/MyapplDir directory." ::= { sysApplInstallPkgEntry 7 } -- sysApplInstallElmtTable -- The table describing the individual application package -- elements (files and executables) installed on the host computer. sysApplInstallElmtTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplInstallElmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table details the individual application package elements (files and executables) which comprise the applications defined in the sysApplInstallPkg Table. Each entry in this table has an index to the sysApplInstallPkg table to identify the application package of which it is a part. As a result, there may be many entries in this table for each instance in the sysApplInstallPkg Table. Table entries are indexed by sysApplInstallPkgIndex, sysApplInstallElmtIndex to facilitate retrieval of all elements associated with a particular installed application package." ::= { sysApplInstalled 2 } sysApplInstallElmtEntry OBJECT-TYPE SYNTAX SysApplInstallElmtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logical row describing an element of an installed application. The element may be an executable or non-executable file." INDEX {sysApplInstallPkgIndex, sysApplInstallElmtIndex} ::= { sysApplInstallElmtTable 1 } SysApplInstallElmtEntry ::= SEQUENCE { sysApplInstallElmtIndex Unsigned32, sysApplInstallElmtName Utf8String, sysApplInstallElmtType INTEGER, sysApplInstallElmtDate DateAndTime, sysApplInstallElmtPath LongUtf8String, sysApplInstallElmtSizeHigh Unsigned32, sysApplInstallElmtSizeLow Unsigned32, sysApplInstallElmtRole BITS, sysApplInstallElmtModifyDate DateAndTime, sysApplInstallElmtCurSizeHigh Unsigned32, sysApplInstallElmtCurSizeLow Unsigned32 } sysApplInstallElmtIndex OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer used for indexing. The value of this index is unique among all rows in this table that exist or have existed since the last agent restart." ::= { sysApplInstallElmtEntry 1 } sysApplInstallElmtName OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The name of this element which is contained in the application." ::= { sysApplInstallElmtEntry 2 } sysApplInstallElmtType OBJECT-TYPE SYNTAX INTEGER { unknown(1), nonexecutable(2), operatingSystem(3), -- executable deviceDriver(4), -- executable application(5) -- executable } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of element that is part of the installed application." ::= { sysApplInstallElmtEntry 3 } sysApplInstallElmtDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time that this component was installed on the system." ::= { sysApplInstallElmtEntry 4 } sysApplInstallElmtPath OBJECT-TYPE SYNTAX LongUtf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The full directory path where this element is installed. For example, the value would be '/opt/EMPuma/bin' for an element installed in the directory '/opt/EMPuma/bin'. Most application packages include information about the elements contained in the package. In addition, elements are typically installed in sub-directories under the package installation directory. In cases where the element path names are not included in the package information itself, the path can usually be determined by a simple search of the sub-directories. If the element is not installed in that location and there is no other information available to the agent implementation, then the path is unknown and null is returned." ::= { sysApplInstallElmtEntry 5} sysApplInstallElmtSizeHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The installed file size in 2^32 byte blocks. This is the size of the file on disk immediately after installation. For example, for a file with a total size of 4,294,967,296 bytes, this variable would have a value of 1; for a file with a total size of 4,294,967,295 bytes this variable would be 0." ::= { sysApplInstallElmtEntry 6 } sysApplInstallElmtSizeLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The installed file size modulo 2^32 bytes. This is the size of the file on disk immediately after installation. For example, for a file with a total size of 4,294,967,296 bytes this variable would have a value of 0; for a file with a total size of 4,294,967,295 bytes this variable would be 4,294,967,295." ::= { sysApplInstallElmtEntry 7 } sysApplInstallElmtRole OBJECT-TYPE SYNTAX BITS { executable(0), -- An application may have one or -- more executable elements. The rest of the -- bits have no meaning if the element is not -- executable. exclusive(1), -- Only one copy of an exclusive element may be -- running per invocation of the running -- application. primary(2), -- The primary executable. An application can -- have one, and only one element that is designated -- as the primary executable. The execution of -- this element constitutes an invocation of -- the application. This is used by the agent -- implementation to determine the initiation of -- an application. The primary executable must -- remain running long enough for the agent -- implementation to detect its presence. required(3), -- An application may have zero or more required -- elements. All required elements must be running -- in order for the application to be judged to be -- running and healthy. dependent(4), -- An application may have zero or more -- dependent elements. Dependent elements may -- not be running unless required elements are. unknown(5) -- Default value for the case when an operator -- has not yet assigned one of the other values. -- When set, bits 1, 2, 3, and 4 have no meaning. } MAX-ACCESS read-write STATUS current DESCRIPTION "An operator assigned value used in the determination of application status. This value is used by the agent to determine both the mapping of started processes to the initiation of an application, as well as to allow for a determination of application health. The default value, unknown(5), is used when an operator has not yet assigned one of the other values. If unknown(5) is set, bits 1 - 4 have no meaning. The possible values are: executable(0), An application may have one or more executable elements. The rest of the bits have no meaning if the element is not executable. exclusive(1), Only one copy of an exclusive element may be running per invocation of the running application. primary(2), The primary executable. An application can have one, and only one element that is designated as the primary executable. The execution of this element constitutes an invocation of the application. This is used by the agent implementation to determine the initiation of an application. The primary executable must remain running long enough for the agent implementation to detect its presence. required(3), An application may have zero or more required elements. All required elements must be running in order for the application to be judged to be running and healthy. dependent(4), An application may have zero or more dependent elements. Dependent elements may not be running unless required elements are. unknown(5) Default value for the case when an operator has not yet assigned one of the other values. When set, bits 1, 2, 3, and 4 have no meaning. sysApplInstallElmtRole is used by the agent implementation in determining the initiation of an application, the current state of a running application (see sysApplRunCurrentState), when an application invocation is no longer running, and the exit status of a terminated application invocation (see sysApplPastRunExitState)." DEFVAL { { unknown } } ::= { sysApplInstallElmtEntry 8 } sysApplInstallElmtModifyDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time that this element was last modified. Modification of the sysApplInstallElmtRole columnar object does NOT constitute a modification of the element itself and should not affect the value of this object." ::= { sysApplInstallElmtEntry 9 } sysApplInstallElmtCurSizeHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current file size in 2^32 byte blocks. For example, for a file with a total size of 4,294,967,296 bytes, this variable would have a value of 1; for a file with a total size of 4,294,967,295 bytes this variable would be 0." ::= { sysApplInstallElmtEntry 10 } sysApplInstallElmtCurSizeLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current file size modulo 2^32 bytes. For example, for a file with a total size of 4,294,967,296 bytes this variable would have a value of 0; for a file with a total size of 4,294,967,295 bytes this variable would be 4,294,967,295." ::= { sysApplInstallElmtEntry 11 } -- sysApplRun Group -- This group models activity information for applications -- that have been invoked and are either currently running, -- or have previously run on the host system. Likewise, -- the individual elements of an invoked application are -- also modeled to show currently running processes, and -- processes that have run in the past. -- sysApplRunTable -- The sysApplRunTable contains the application instances -- which are currently running on the host. Since a single -- application might be invoked multiple times, an entry is -- added to this table for each INVOCATION of an application. -- The table is indexed by sysApplInstallPkgIndex, sysApplRunIndex -- to enable managers to easily locate all invocations of -- a particular application package. sysApplRunTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describes the applications which are executing on the host. Each time an application is invoked, an entry is created in this table. When an application ends, the entry is removed from this table and a corresponding entry is created in the SysApplPastRunTable. A new entry is created in this table whenever the agent implementation detects a new running process that is an installed application element whose sysApplInstallElmtRole designates it as being the application's primary executable (sysApplInstallElmtRole = primary(2) ). The table is indexed by sysApplInstallPkgIndex, sysApplRunIndex to enable managers to easily locate all invocations of a particular application package." ::= { sysApplRun 1 } sysApplRunEntry OBJECT-TYPE SYNTAX SysApplRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logical row describing an application which is currently running on this host." INDEX { sysApplInstallPkgIndex, sysApplRunIndex } ::= { sysApplRunTable 1 } SysApplRunEntry ::= SEQUENCE { sysApplRunIndex Unsigned32, sysApplRunStarted DateAndTime, sysApplRunCurrentState RunState } sysApplRunIndex OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table. An arbitrary integer used only for indexing purposes. Generally monotonically increasing from 1 as new applications are started on the host, it uniquely identifies application invocations. The numbering for this index increases by 1 for each INVOCATION of an application, regardless of which installed application package this entry represents a running instance of. An example of the indexing for a couple of entries is shown below. : sysApplRunStarted.17.14 sysApplRunStarted.17.63 sysApplRunStarted.18.13 : In this example, the agent has observed 12 application invocations when the application represented by entry 18 in the sysApplInstallPkgTable is invoked. The next invocation detected by the agent is an invocation of installed application package 17. Some time later, installed application 17 is invoked a second time. NOTE: this index is not intended to reflect a real-time (wall clock time) ordering of application invocations; it is merely intended to uniquely identify running instances of applications. Although the sysApplInstallPkgIndex is included in the INDEX clause for this table, it serves only to ease searching of this table by installed application and does not contribute to uniquely identifying table entries." ::= { sysApplRunEntry 1 } sysApplRunStarted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time that the application was started." ::= { sysApplRunEntry 2 } sysApplRunCurrentState OBJECT-TYPE SYNTAX RunState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the running application instance. The possible values are running(1), runnable(2) but waiting for a resource such as CPU, waiting(3) for an event, exiting(4), or other(5). This value is based on an evaluation of the running elements of this application instance (see sysApplElmRunState) and their Roles as defined by sysApplInstallElmtRole. An agent implementation may detect that an application instance is in the process of exiting if one or more of its REQUIRED elements are no longer running. Most agent implementations will wait until a second internal poll has been completed to give the system time to start REQUIRED elements before marking the application instance as exiting." ::= { sysApplRunEntry 3 } -- sysApplPastRunTable -- The sysApplPastRunTable provides a history of applications -- previously run on the host computer. Entries are removed from -- the sysApplRunTable and corresponding entries are added to this -- table when an application becomes inactive. Entries remain in -- this table until they are aged out when either the table size -- reaches a maximum as determined by the sysApplPastRunMaxRows, -- or when an entry has aged to exceed a time limit as set be -- sysApplPastRunTblTimeLimit. -- -- When aging out entries, the oldest entry, as determined by -- the value of sysApplPastRunTimeEnded, will be removed first. sysApplPastRunTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplPastRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A history of the applications that have previously run on the host computer. An entry's information is moved to this table from the sysApplRunTable when the invoked application represented by the entry ceases to be running. An agent implementation can determine that an application invocation is no longer running by evaluating the running elements of the application instance and their Roles as defined by sysApplInstallElmtRole. Obviously, if there are no running elements for the application instance, then the application invocation is no longer running. If any one of the REQUIRED elements is not running, the application instance may be in the process of exiting. Most agent implementations will wait until a second internal poll has been completed to give the system time to either restart partial failures or to give all elements time to exit. If, after the second poll, there are REQUIRED elements that are not running, then the application instance may be considered by the agent implementation to no longer be running. Entries remain in the sysApplPastRunTable until they are aged out when either the table size reaches a maximum as determined by the sysApplPastRunMaxRows, or when an entry has aged to exceed a time limit as set by sysApplPastRunTblTimeLimit. Entries in this table are indexed by sysApplInstallPkgIndex, sysApplPastRunIndex to facilitate retrieval of all past run invocations of a particular installed application." ::= { sysApplRun 2 } sysApplPastRunEntry OBJECT-TYPE SYNTAX SysApplPastRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logical row describing an invocation of an application which was previously run and has terminated. The entry is basically copied from the sysApplRunTable when the application instance terminates. Hence, the entry's value for sysApplPastRunIndex is the same as its value was for sysApplRunIndex." INDEX { sysApplInstallPkgIndex, sysApplPastRunIndex } ::= { sysApplPastRunTable 1 } SysApplPastRunEntry ::= SEQUENCE { sysApplPastRunIndex Unsigned32, sysApplPastRunStarted DateAndTime, sysApplPastRunExitState INTEGER, sysApplPastRunTimeEnded DateAndTime } sysApplPastRunIndex OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table. An integer matching the value of the removed sysApplRunIndex corresponding to this row." ::= { sysApplPastRunEntry 1 } sysApplPastRunStarted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time that the application was started." ::= { sysApplPastRunEntry 2 } sysApplPastRunExitState OBJECT-TYPE SYNTAX INTEGER { complete (1), -- normal exit at sysApplRunTimeEnded failed (2), -- abnormal exit other (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the application instance when it terminated. This value is based on an evaluation of the running elements of an application and their Roles as defined by sysApplInstallElmtRole. An application instance is said to have exited in a COMPLETE state and its entry is removed from the sysApplRunTable and added to the sysApplPastRunTable when the agent detects that ALL elements of an application invocation are no longer running. Most agent implementations will wait until a second internal poll has been completed to give the system time to either restart partial failures or to give all elements time to exit. A failed state occurs if, after the second poll, any elements continue to run but one or more of the REQUIRED elements are no longer running. All other combinations MUST be defined as OTHER." ::= { sysApplPastRunEntry 3 } sysApplPastRunTimeEnded OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The DateAndTime the application instance was determined to be no longer running." ::= { sysApplPastRunEntry 4 } -- sysApplElmtRunTable -- The sysApplElmtRunTable contains an entry for each process that -- is currently running on the host. An entry is created in -- this table for each process at the time it is started, and will -- remain in the table until the process terminates. -- -- The table is indexed by sysApplElmtRunInstallPkg, -- sysApplElmtRunInvocID, and sysApplElmtRunIndex to make it easy -- to locate all running elements of a particular invoked application -- which has been installed on the system. sysApplElmtRunTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplElmtRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describes the processes which are currently executing on the host system. Each entry represents a running process and is associated with the invoked application of which that process is a part, if possible. This table contains an entry for every process currently running on the system, regardless of whether its 'parent' application can be determined. So, for example, processes like 'ps' and 'grep' will have entries though they are not associated with an installed application package. Because a running application may involve more than one executable, it is possible to have multiple entries in this table for each application. Entries are removed from this table when the process terminates. The table is indexed by sysApplElmtRunInstallPkg, sysApplElmtRunInvocID, and sysApplElmtRunIndex to facilitate the retrieval of all running elements of a particular invoked application which has been installed on the system." ::= { sysApplRun 3 } sysApplElmtRunEntry OBJECT-TYPE SYNTAX SysApplElmtRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logical row describing a process currently running on this host. When possible, the entry is associated with the invoked application of which it is a part." INDEX { sysApplElmtRunInstallPkg, sysApplElmtRunInvocID, sysApplElmtRunIndex } ::= { sysApplElmtRunTable 1 } SysApplElmtRunEntry ::= SEQUENCE { sysApplElmtRunInstallPkg Unsigned32, sysApplElmtRunInvocID Unsigned32, sysApplElmtRunIndex Unsigned32, sysApplElmtRunInstallID Unsigned32, sysApplElmtRunTimeStarted DateAndTime, sysApplElmtRunState RunState, sysApplElmtRunName LongUtf8String, sysApplElmtRunParameters Utf8String, sysApplElmtRunCPU TimeTicks, sysApplElmtRunMemory Gauge32, sysApplElmtRunNumFiles Gauge32, sysApplElmtRunUser Utf8String } sysApplElmtRunInstallPkg OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table, this value identifies the installed software package for the application of which this process is a part. Provided that the process's 'parent' application can be determined, the value of this object is the same value as the sysApplInstallPkgIndex for the entry in the sysApplInstallPkgTable that corresponds to the installed application of which this process is a part. If, however, the 'parent' application cannot be determined, (for example the process is not part of a particular installed application), the value for this object is then '0', signifying that this process cannot be related back to an application, and in turn, an installed software package." ::= { sysApplElmtRunEntry 1 } sysApplElmtRunInvocID OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table, this value identifies the invocation of an application of which this process is a part. Provided that the 'parent' application can be determined, the value of this object is the same value as the sysApplRunIndex for the corresponding application invocation in the sysApplRunTable. If, however, the 'parent' application cannot be determined, the value for this object is then '0', signifying that this process cannot be related back to an invocation of an application in the sysApplRunTable." ::= { sysApplElmtRunEntry 2 } sysApplElmtRunIndex OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table. A unique value for each process running on the host. Wherever possible, this should be the system's native, unique identification number." ::= { sysApplElmtRunEntry 3 } sysApplElmtRunInstallID OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the sysApplInstallElmtTable. The value of this object is the same value as the sysApplInstallElmtIndex for the application element of which this entry represents a running instance. If this process cannot be associated with an installed executable, the value should be '0'." ::= { sysApplElmtRunEntry 4 } sysApplElmtRunTimeStarted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the process was started." ::= { sysApplElmtRunEntry 5 } sysApplElmtRunState OBJECT-TYPE SYNTAX RunState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the running process. The possible values are running(1), runnable(2) but waiting for a resource such as CPU, waiting(3) for an event, exiting(4), or other(5)." ::= { sysApplElmtRunEntry 6 } sysApplElmtRunName OBJECT-TYPE SYNTAX LongUtf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The full path and filename of the process. For example, '/opt/MYYpkg/bin/myyproc' would be returned for process 'myyproc' whose execution path is '/opt/MYYpkg/bin/myyproc'." ::= { sysApplElmtRunEntry 7 } sysApplElmtRunParameters OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The starting parameters for the process." ::= { sysApplElmtRunEntry 8 } sysApplElmtRunCPU OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The number of centi-seconds of the total system's CPU resources consumed by this process. Note that on a multi-processor system, this value may have been incremented by more than one centi-second in one centi-second of real (wall clock) time." ::= { sysApplElmtRunEntry 9 } sysApplElmtRunMemory OBJECT-TYPE SYNTAX Gauge32 UNITS "Kbytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of real system memory measured in Kbytes currently allocated to this process." ::= { sysApplElmtRunEntry 10 } sysApplElmtRunNumFiles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of regular files currently open by the process. Transport connections (sockets) should NOT be included in the calculation of this value, nor should operating system specific special file types." ::= { sysApplElmtRunEntry 11 } sysApplElmtRunUser OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The process owner's login name (e.g. root)." ::= { sysApplElmtRunEntry 12 } -- sysApplElmtPastRunTable -- The sysApplElmtPastRunTable maintains a history of -- processes which have previously executed on -- the host as part of an application. Upon termination -- of a process, the entry representing the process is removed from -- the sysApplElmtRunTable and a corresponding entry is created in -- this table provided that the process was part of an -- identifiable application. If the process could not be associated -- with an invoked application, no corresponding entry is created. -- Hence, whereas the sysApplElmtRunTable contains an entry for -- every process currently executing on the system, the -- sysApplElmtPastRunTable only contains entries for processes -- that previously executed as part of an invoked application. -- -- Entries remain in this table until they are aged out when -- either the number of entries in the table reaches a -- maximum as determined by sysApplElmtPastRunMaxRows, or -- when an entry has aged to exceed a time limit as set by -- sysApplElmtPastRunTblTimeLimit. When aging out entries, -- the oldest entry, as determined by the value of -- sysApplElmtPastRunTimeEnded, will be removed first. -- -- The table is indexed by sysApplInstallPkgIndex (from the -- sysApplInstallPkgTable), sysApplElmtPastRunInvocID, and -- sysApplElmtPastRunIndex to make it easy to locate all -- previously executed processes of a particular invoked application -- that has been installed on the system. sysApplElmtPastRunTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplElmtPastRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table describes the processes which have previously executed on the host system as part of an application. Each entry represents a process which has previously executed and is associated with the invoked application of which it was a part. Because an invoked application may involve more than one executable, it is possible to have multiple entries in this table for each application invocation. Entries are added to this table when the corresponding process in the sysApplElmtRun Table terminates. Entries remain in this table until they are aged out when either the number of entries in the table reaches a maximum as determined by sysApplElmtPastRunMaxRows, or when an entry has aged to exceed a time limit as set by sysApplElmtPastRunTblTimeLimit. When aging out entries, the oldest entry, as determined by the value of sysApplElmtPastRunTimeEnded, will be removed first. The table is indexed by sysApplInstallPkgIndex (from the sysApplInstallPkgTable), sysApplElmtPastRunInvocID, and sysApplElmtPastRunIndex to make it easy to locate all previously executed processes of a particular invoked application that has been installed on the system." ::= { sysApplRun 4 } sysApplElmtPastRunEntry OBJECT-TYPE SYNTAX SysApplElmtPastRunEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The logical row describing a process which was previously executed on this host as part of an installed application. The entry is basically copied from the sysApplElmtRunTable when the process terminates. Hence, the entry's value for sysApplElmtPastRunIndex is the same as its value was for sysApplElmtRunIndex. Note carefully: only those processes which could be associated with an identified application are included in this table." INDEX { sysApplInstallPkgIndex, sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex } ::= { sysApplElmtPastRunTable 1 } SysApplElmtPastRunEntry ::= SEQUENCE { sysApplElmtPastRunInvocID Unsigned32, sysApplElmtPastRunIndex Unsigned32, sysApplElmtPastRunInstallID Unsigned32, sysApplElmtPastRunTimeStarted DateAndTime, sysApplElmtPastRunTimeEnded DateAndTime, sysApplElmtPastRunName LongUtf8String, sysApplElmtPastRunParameters Utf8String, sysApplElmtPastRunCPU TimeTicks, sysApplElmtPastRunMemory Unsigned32, sysApplElmtPastRunNumFiles Unsigned32, sysApplElmtPastRunUser Utf8String } sysApplElmtPastRunInvocID OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table, this value identifies the invocation of an application of which the process represented by this entry was a part. The value of this object is the same value as the sysApplRunIndex for the corresponding application invocation in the sysApplRunTable. If the invoked application as a whole has terminated, it will be the same as the sysApplPastRunIndex." ::= { sysApplElmtPastRunEntry 1 } sysApplElmtPastRunIndex OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Part of the index for this table. An integer assigned by the agent equal to the corresponding sysApplElmtRunIndex which was removed from the sysApplElmtRunTable and moved to this table when the element terminated. Note: entries in this table are indexed by sysApplElmtPastRunInvocID, sysApplElmtPastRunIndex. The possibility exists, though unlikely, of a collision occurring by a new entry which was run by the same invoked application (InvocID), and was assigned the same process identification number (ElmtRunIndex) as an element which was previously run by the same invoked application. Should this situation occur, the new entry replaces the old entry. See Section: 'Implementation Issues - sysApplElmtPastRunTable Entry Collisions' for the conditions that would have to occur in order for a collision to occur." ::= { sysApplElmtPastRunEntry 2 } sysApplElmtPastRunInstallID OBJECT-TYPE SYNTAX Unsigned32 (1..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the installed element table. The value of this object is the same value as the sysApplInstallElmtIndex for the application element of which this entry represents a previously executed process." ::= { sysApplElmtPastRunEntry 3 } sysApplElmtPastRunTimeStarted OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the process was started." ::= { sysApplElmtPastRunEntry 4 } sysApplElmtPastRunTimeEnded OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time the process ended." ::= { sysApplElmtPastRunEntry 5 } sysApplElmtPastRunName OBJECT-TYPE SYNTAX LongUtf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The full path and filename of the process. For example, '/opt/MYYpkg/bin/myyproc' would be returned for process 'myyproc' whose execution path was '/opt/MYYpkg/bin/myyproc'." ::= { sysApplElmtPastRunEntry 6 } sysApplElmtPastRunParameters OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The starting parameters for the process." ::= { sysApplElmtPastRunEntry 7 } sysApplElmtPastRunCPU OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The last known number of centi-seconds of the total system's CPU resources consumed by this process. Note that on a multi-processor system, this value may increment by more than one centi-second in one centi-second of real (wall clock) time." ::= { sysApplElmtPastRunEntry 8 } sysApplElmtPastRunMemory OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) UNITS "Kbytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The last known total amount of real system memory measured in Kbytes allocated to this process before it terminated." ::= { sysApplElmtPastRunEntry 9 } sysApplElmtPastRunNumFiles OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The last known number of files open by the process before it terminated. Transport connections (sockets) should NOT be included in the calculation of this value." ::= { sysApplElmtPastRunEntry 10 } sysApplElmtPastRunUser OBJECT-TYPE SYNTAX Utf8String MAX-ACCESS read-only STATUS current DESCRIPTION "The process owner's login name (e.g. root)." ::= { sysApplElmtPastRunEntry 11 } -- Additional Scalar objects to control table sizes sysApplPastRunMaxRows OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of entries allowed in the sysApplPastRunTable. Once the number of rows in the sysApplPastRunTable reaches this value, the management subsystem will remove the oldest entry in the table to make room for the new entry to be added. Entries will be removed on the basis of oldest sysApplPastRunTimeEnded value first. This object may be used to control the amount of system resources that can used for sysApplPastRunTable entries. A conforming implementation should attempt to support the default value, however, a lesser value may be necessary due to implementation-dependent issues and resource availability." DEFVAL { 500 } ::= { sysApplRun 5 } sysApplPastRunTableRemItems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of the number of entries removed from the sysApplPastRunTable because of table size limitations as set in sysApplPastRunMaxRows. This counter is the number of entries the management subsystem has had to remove in order to make room for new entries (so as not to exceed the limit set by sysApplPastRunMaxRows) since the last initialization of the management subsystem." ::= { sysApplRun 6 } sysApplPastRunTblTimeLimit OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time in seconds which an entry in the sysApplPastRunTable may exist before it is removed. Any entry that is older than this value will be removed (aged out) from the table. Note that an entry may be aged out prior to reaching this time limit if it is the oldest entry in the table and must be removed to make space for a new entry so as to not exceed sysApplPastRunMaxRows." DEFVAL { 7200 } ::= { sysApplRun 7 } sysApplElemPastRunMaxRows OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of entries allowed in the sysApplElmtPastRunTable. Once the number of rows in the sysApplElmtPastRunTable reaches this value, the management subsystem will remove the oldest entry to make room for the new entry to be added. Entries will be removed on the basis of oldest sysApplElmtPastRunTimeEnded value first. This object may be used to control the amount of system resources that can used for sysApplElemPastRunTable entries. A conforming implementation should attempt to support the default value, however, a lesser value may be necessary due to implementation-dependent issues and resource availability." DEFVAL { 500 } ::= { sysApplRun 8 } sysApplElemPastRunTableRemItems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A counter of the number of entries removed from the sysApplElemPastRunTable because of table size limitations as set in sysApplElemPastRunMaxRows. This counter is the number of entries the management subsystem has had to remove in order to make room for new entries (so as not to exceed the limit set by sysApplElemPastRunMaxRows) since the last initialization of the management subsystem." ::= { sysApplRun 9 } sysApplElemPastRunTblTimeLimit OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum time in seconds which an entry in the sysApplElemPastRunTable may exist before it is removed. Any entry that is older than this value will be removed (aged out) from the table. Note that an entry may be aged out prior to reaching this time limit if it is the oldest entry in the table and must be removed to make space for a new entry so as to not exceed sysApplElemPastRunMaxRows." DEFVAL { 7200 } ::= { sysApplRun 10 } sysApplAgentPollInterval OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum interval in seconds that the management subsystem implementing this MIB will poll the status of the managed resources. Because of the non-trivial effort involved in polling the managed resources, and because the method for obtaining the status of the managed resources is implementation-dependent, a conformant implementation may chose a lower bound greater than 0. A value of 0 indicates that there is no delay in the passing of information from the managed resources to the agent." DEFVAL { 60 } ::= { sysApplRun 11 } -- sysApplMap Group -- This group contains a table, the sysApplMapTable, -- whose sole purpose is to provide a 'backwards' -- mapping so that, given a known sysApplElmtRunIndex -- (process identification number), the corresponding invoked -- application (sysApplRunIndex), installed element -- (sysApplInstallElmtIndex), and installed application -- package (sysApplInstallPkgIndex) can be quickly determined. -- -- The table will contain one entry for each process -- currently running on the system. -- -- A backwards mapping is extremely useful since the tables -- in this MIB module are typically indexed with the -- installed application package (sysApplInstallPkgIndex) -- as the primary key, and on down as required by the -- specific table, with the process ID number (sysApplElmtRunIndex) -- being the least significant key. -- -- It is expected that management applications will use -- this mapping table by doing a 'GetNext' operation with -- the known process ID number (sysApplElmtRunIndex) as the partial -- instance identifier. Assuming that there is an entry for -- the process, the result should return a single columnar value, -- the sysApplMapInstallPkgIndex, with the sysApplElmtRunIndex, -- sysApplRunIndex, and sysApplInstallElmtIndex contained in the -- instance identifier for the returned MIB object value. -- -- NOTE: if the process can not be associated back to an -- invoked application installed on the system, then the -- value returned for the columnar value sysApplMapInstallPkgIndex -- will be '0' and the instance portion of the object-identifier -- will be the process ID number (sysApplElmtRunIndex) followed -- by 0.0. sysApplMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SysApplMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sole purpose of this table is to provide a 'backwards' mapping so that, given a known sysApplElmtRunIndex (process identification number), the corresponding invoked application (sysApplRunIndex), installed element (sysApplInstallElmtIndex), and installed application package (sysApplInstallPkgIndex) can be quickly determined. This table will contain one entry for each process that is currently executing on the system. It is expected that management applications will use this mapping table by doing a 'GetNext' operation with the known process ID number (sysApplElmtRunIndex) as the partial instance identifier. Assuming that there is an entry for the process, the result should return a single columnar value, the sysApplMapInstallPkgIndex, with the sysApplElmtRunIndex, sysApplRunIndex, and sysApplInstallElmtIndex contained in the instance identifier for the returned MIB object value. NOTE: if the process can not be associated back to an invoked application installed on the system, then the value returned for the columnar value sysApplMapInstallPkgIndex will be '0' and the instance portion of the object-identifier will be the process ID number (sysApplElmtRunIndex) followed by 0.0." ::= { sysApplMap 1 } sysApplMapEntry OBJECT-TYPE SYNTAX SysApplMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A logical row representing a process currently running on the system. This entry provides the index mapping from process identifier, back to the invoked application, installed element, and finally, the installed application package. The entry includes only one accessible columnar object, the sysApplMapInstallPkgIndex, but the invoked application and installed element can be determined from the instance identifier since they form part of the index clause." INDEX { sysApplElmtRunIndex, sysApplElmtRunInvocID, sysApplMapInstallElmtIndex } ::= { sysApplMapTable 1 } SysApplMapEntry ::= SEQUENCE { sysApplMapInstallElmtIndex Unsigned32, sysApplMapInstallPkgIndex Unsigned32 } sysApplMapInstallElmtIndex OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the sysApplInstallElmtTable. The value of this object is the same value as the sysApplInstallElmtIndex for the application element of which this entry represents a running instance. If this process cannot be associated to an installed executable, the value should be '0'." ::= { sysApplMapEntry 1 } sysApplMapInstallPkgIndex OBJECT-TYPE SYNTAX Unsigned32 (0..'ffffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the installed software package for the application of which this process is a part. Provided that the process's 'parent' application can be determined, the value of this object is the same value as the sysApplInstallPkgIndex for the entry in the sysApplInstallPkgTable that corresponds to the installed application of which this process is a part. If, however, the 'parent' application cannot be determined, (for example the process is not part of a particular installed application), the value for this object is then '0', signifying that this process cannot be related back to an application, and in turn, an installed software package." ::= { sysApplMapEntry 2 } -- Conformance Macros sysApplMIBCompliances OBJECT IDENTIFIER ::= { sysApplConformance 1 } sysApplMIBGroups OBJECT IDENTIFIER ::= { sysApplConformance 2 } sysApplMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the System Application MIB" MODULE -- this module MANDATORY-GROUPS { sysApplInstalledGroup, sysApplRunGroup, sysApplMapGroup } ::= { sysApplMIBCompliances 1 } sysApplInstalledGroup OBJECT-GROUP OBJECTS { sysApplInstallPkgManufacturer, sysApplInstallPkgProductName, sysApplInstallPkgVersion, sysApplInstallPkgSerialNumber, sysApplInstallPkgDate, sysApplInstallPkgLocation, sysApplInstallElmtName, sysApplInstallElmtType, sysApplInstallElmtDate, sysApplInstallElmtPath, sysApplInstallElmtSizeHigh, sysApplInstallElmtSizeLow, sysApplInstallElmtRole, sysApplInstallElmtModifyDate, sysApplInstallElmtCurSizeHigh, sysApplInstallElmtCurSizeLow } STATUS current DESCRIPTION "The system application installed group contains information about applications and their constituent components which have been installed on the host system." ::= { sysApplMIBGroups 1 } sysApplRunGroup OBJECT-GROUP OBJECTS { sysApplRunStarted, sysApplRunCurrentState, sysApplPastRunStarted, sysApplPastRunExitState, sysApplPastRunTimeEnded, sysApplElmtRunInstallID, sysApplElmtRunTimeStarted, sysApplElmtRunState, sysApplElmtRunName, sysApplElmtRunParameters, sysApplElmtRunCPU, sysApplElmtRunMemory, sysApplElmtRunNumFiles, sysApplElmtRunUser, sysApplElmtPastRunInstallID, sysApplElmtPastRunTimeStarted, sysApplElmtPastRunTimeEnded, sysApplElmtPastRunName, sysApplElmtPastRunParameters, sysApplElmtPastRunCPU, sysApplElmtPastRunMemory, sysApplElmtPastRunNumFiles, sysApplElmtPastRunUser, sysApplPastRunMaxRows, sysApplPastRunTableRemItems, sysApplPastRunTblTimeLimit, sysApplElemPastRunMaxRows, sysApplElemPastRunTableRemItems, sysApplElemPastRunTblTimeLimit, sysApplAgentPollInterval } STATUS current DESCRIPTION "The system application run group contains information about applications and associated elements which have run or are currently running on the host system." ::= { sysApplMIBGroups 2 } sysApplMapGroup OBJECT-GROUP OBJECTS { sysApplMapInstallPkgIndex } STATUS current DESCRIPTION "The Map Group contains a single table, sysApplMapTable, that provides a backwards mapping for determining the invoked application, installed element, and installed application package given a known process identification number." ::= { sysApplMIBGroups 3 } END